☣️ UN 1365 • CLASS 9

UN 1365 — Cotton, wet

Placard: Miscellaneous. ERG Guide 133. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 1365 is Cotton, wet, a Class 9 material assigned to ERG Guide 133. It is generally wet during transport, but drying, contamination or heat buildup can create a later smoldering fire concern.

Hazard overview: UN 1365 presents self-heating, smoldering fire and re-ignition hazards. Disturbing hot material can introduce oxygen and intensify burning, while smoke may contain carbon monoxide and irritating combustion products.

Response guidance: For a UN 1365 incident, responders should verify the product with shipping papers, package markings, SDS and ERG Guide 133. Establish incident command, isolate the area, stay upwind, avoid unnecessary disturbance of powder, piles or damaged packaging, and use only extinguishing agents compatible with the specific material.

Firefighter training notes: Training for UN 1365 should emphasize self-heating, smoldering piles, oxygen exposure during overhaul, thermal monitoring and re-ignition. Common errors include opening hot piles too aggressively and ending operations before deep-seated heat is controlled.

Regulatory context: Cotton, wet is regulated as a hazardous material for transportation and emergency response purposes. Transportation, workplace exposure, spill reporting, waste handling, storage and environmental requirements may vary by formulation, quantity and jurisdiction. Verify current requirements through shipping papers, SDS, facility documents and applicable DOT, OSHA, EPA, NFPA, state or local authority guidance.

Storage & handling: Cotton, wet should be stored to prevent self-heating, oil/moisture contamination where relevant, compacted hot spots and ignition exposure. Keep piles, bales or packages ventilated where appropriate and inspect for heat, odor or smoke according to facility procedures.

Advertisement

UN 1365 Quick Details

UN 1365
Product name: Cotton, wet
DOT Class: 9
Placard type: Miscellaneous
ERG Guide: 133 (check current ERG)
Initial isolation: ERG 133: Small spill isolate 25m all directions; large spill isolate 50m all directions; fire isolate 800m and consider evacuation

Common Hazards of UN 1365

  • Wet cotton is not normally ignitable while saturated, but drying, contamination or microbial/self-heating conditions can create a later fire hazard.
  • Piles, sacks, bales or rolls may retain heat and smolder internally before open flame is visible.
  • Disturbing hot material may introduce oxygen and intensify smoldering or flame spread.
  • Fire may produce irritating or toxic smoke including carbon monoxide.
  • Runoff from fire control may carry organic or oily contamination.
  • Large quantities may require prolonged overhaul and thermal monitoring.
  • Material may re-ignite after apparent extinguishment.

Chemical Identity & Physical Properties

White to off-white fibrous material consisting of cellulose fibers saturated with water. Wet cotton has little to no odor in its damp state.

Also known asWet cottonCotton waste wetMoist cotton fibersCotton linters wet
AppearanceWhite to off-white fibrous material consisting of cellulose fibers saturated with water. Wet cotton has little to no odor in its damp state.
Flash PointNot applicable (requires drying to become flammable)
Boiling PointNot applicable (decomposes upon heating)
Vapor DensityNot applicable (solid material)
Water ReactivityNo significant reaction; material is already wet
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 1365

Extinguishing Media

Use water spray, fog, foam, dry chemical, CO2 or sand only when compatible with the specific material and incident command; avoid spreading dust, oil or burning material.

PPE Requirements

⚠️ Level D minimum for handling wet material; upgrade to Level C with SCBA if fire develops or material begins to dry and smolder

Use SCBA for smoke, smoldering material, dust or confined-space operations. Wear protective clothing and gloves appropriate for hot organic material, contaminated runoff and extended overhaul conditions.

Isolation & Evacuation

ERG 133: Small spill isolate 25m all directions; large spill isolate 50m all directions; fire isolate 800m and consider evacuation
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 133).

First Actions for a UN 1365 Incident

  • CALL 911. Then call the emergency response telephone number on the shipping paper, if available.
  • Keep unauthorized personnel away.
  • Stay upwind, uphill and/or upstream.
  • Check for heat, smoke, odor or smoldering before disturbing piles, bales, sacks or containers.
  • Avoid breaking apart hot material unless incident command has a controlled plan for exposure, extinguishment and overhaul.
  • Isolate the area and remove ignition sources if it is safe to do so.
  • Use thermal imaging, monitoring and extended overhaul where available.
  • Use ERG Guide 133, shipping papers, SDS and local SOP for protective actions and fire-control decisions.
Advertisement

📋 Copy & Share Field Card

UN 1365 — Cotton, wet
HAZMAT RADIO NOTE — UN 1365 Product: Cotton, wet Class 9 / Miscellaneous / ERG 133 PPE: Level D minimum for handling wet material; upgrade to Level C with SCBA if fire develops or material begins to dry and smolder ISOLATION: ERG 133: Small spill isolate 25m all directions; large spill isolate 50m all directions; fire isolate 800m and consider evacuation ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 1365 — Cotton, wet Class: 9 | Placard: Miscellaneous | ERG Guide: 133 Appearance: White to off-white fibrous material consisting of cellulose fibers saturated with water. Wet cotton has little to no odor in its damp state. Water Reactivity: No significant reaction; material is already wet Extinguishing: Use water spray, fog, foam, dry chemical, CO2 or sand only when compatible with the specific material and incident command; avoid spreading dust, oil or burning material. PPE: Level D minimum for handling wet material; upgrade to Level C with SCBA if fire develops or material begins to dry and smolder Isolation: ERG 133: Small spill isolate 25m all directions; large spill isolate 50m all directions; fire isolate 800m and consider evacuation — Key Hazards — • Wet cotton is not normally ignitable while saturated, but drying, contamination or microbial/self-heating conditions can create a later fire hazard. • Piles, sacks, bales or rolls may retain heat and smolder internally before open flame is visible. • Disturbing hot material may introduce oxygen and intensify smoldering or flame spread. — First Actions — • CALL 911. Then call the emergency response telephone number on the shipping paper, if available. • Keep unauthorized personnel away. • Stay upwind, uphill and/or upstream. • Check for heat, smoke, odor or smoldering before disturbing piles, bales, sacks or containers. SOURCE: allfirefighter.com/hazmat/un/cotton-wet-un-1365 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN1365 Cotton, wet Cls9 ERG133 | allfirefighter.com/hazmat/un/cotton-wet-un-1365SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/cotton-wet-un-1365

Related UN Numbers in Class 9

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 1365

UN 1365 is Cotton, wet, a hazardous material assigned to ERG Guide 133.

Yes, it can become a fire hazard through self-heating, drying, oil contamination or smoldering conditions.

ERG Guide 133 applies to UN 1365 for initial isolation, protective actions and first response guidance.

UN 1365 presents self-heating, smoldering fire and re-ignition hazards. Disturbing hot material can introduce oxygen and intensify burning, while smoke may contain carbon monoxide and irritating combustion products.

Self-heating or deep smoldering can remain inside piles, sacks, bales or rolls after visible flame is gone, so overhaul and thermal monitoring matter.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.