☣️ UN 1193 • CLASS 3

UN 1193 — Ethyl methyl ketone

Placard: Flammable. ERG Guide 127. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 1193 is Ethyl methyl ketone, a Class 3 flammable ketone solvent assigned to ERG Guide 127. Also known as MEK or 2-butanone, it can produce heavy vapors that ignite easily and flash back.

Hazard overview: UN 1193 presents flammable vapor, flashback and sewer vapor-explosion hazards. Vapors are heavier than air, and exposure may irritate eyes, skin or respiratory tissue, especially in poorly ventilated areas.

Response guidance: For a UN 1193 incident, responders should confirm the product using shipping papers, container markings, SDS and ERG Guide 127. Establish incident command, isolate the area, stay upwind and uphill, remove ignition sources when safe, keep vapors or runoff out of sewers and use compatible fire-control agents from a protected position.

Firefighter training notes: Training for UN 1193 should emphasize flammable liquid vapor travel, flashback, sewer vapor explosion risk, foam compatibility, container cooling and atmospheric monitoring. Common errors include standing downwind, allowing runoff into drains and ignoring low-area vapor collection. Use ERG 127, SDS and local SOP.

Regulatory context: Ethyl methyl ketone is regulated as a hazardous material for transportation and emergency response purposes. Transportation, workplace exposure, spill reporting, waste handling, storage and environmental requirements may vary by formulation, quantity and jurisdiction. Verify current requirements through shipping papers, SDS, facility documents and applicable DOT, OSHA, EPA, NFPA, state or local authority guidance.

Storage & handling: Ethyl methyl ketone should be stored in tightly closed compatible containers in a cool, dry, well-ventilated flammable-liquid storage area. Keep away from heat, sparks, open flames, oxidizers and incompatible materials, with bonding/grounding, secondary containment and drain protection where required.

Advertisement

UN 1193 Quick Details

UN 1193
Product name: Ethyl methyl ketone
DOT Class: 3
Placard type: Flammable
ERG Guide: 127 (check current ERG)
Initial isolation: ERG 127: Isolate spill area 50m in all directions; for large spill isolate 150m, evacuate downwind 800m if tank/rail car involved in fire

Common Hazards of UN 1193

  • HIGHLY FLAMMABLE ketone solvent; vapors may ignite easily.
  • Vapors may form explosive mixtures with air and flash back to the source.
  • Vapors are heavier than air and may collect in low, confined or sewer areas.
  • Liquid or vapor may irritate eyes, skin and respiratory tissue.
  • Runoff to sewer may create fire or explosion hazards.
  • Fire may produce irritating or toxic combustion products.
  • Containers may rupture or explode when heated.

Chemical Identity & Physical Properties

Clear, colorless liquid with a sweet, sharp acetone-like odor. Highly volatile at room temperature.

Also known asMEK2-ButanoneMethyl ethyl ketoneButanoneMEK solvent
CAS Number78-93-3
AppearanceClear, colorless liquid with a sweet, sharp acetone-like odor. Highly volatile at room temperature.
Flash Point-9°C (16°F)
Boiling Point80°C (176°F)
Vapor Density2.4 (heavier than air)
Water ReactivitySoluble in water; no significant reaction
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 1193

Extinguishing Media

Use AFFF or alcohol-resistant foam where compatible, dry chemical or CO2 for Class B fires; water spray may be used to cool exposed containers.

PPE Requirements

⚠️ Level B minimum with SCBA; splash-resistant suit and chemical-resistant gloves required

Use positive-pressure SCBA for fire, heavy vapor or confined-space exposure. Chemical-resistant gloves, splash protection and protective clothing should be selected using SDS, product concentration and incident command.

Isolation & Evacuation

ERG 127: Isolate spill area 50m in all directions; for large spill isolate 150m, evacuate downwind 800m if tank/rail car involved in fire
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 127).

First Actions for a UN 1193 Incident

  • CALL 911. Then call the emergency response telephone number on the shipping paper, if available.
  • Keep unauthorized personnel away.
  • Stay upwind, uphill and/or upstream.
  • Eliminate ignition sources if it is safe to do so.
  • Do not touch or walk through spilled liquid unless properly trained and wearing appropriate protective equipment.
  • Ventilate closed spaces before entering, but only if properly trained, equipped and authorized by incident command.
  • Isolate the spill or leak area for at least 50 meters (150 feet) in all directions.
  • For large spills, fire involvement or strong vapor movement, expand isolation and consider downwind evacuation based on monitoring and incident command.
  • Use ERG Guide 127, shipping papers, SDS and local SOP for protective actions and entry decisions.
Advertisement

📋 Copy & Share Field Card

UN 1193 — Ethyl methyl ketone
HAZMAT RADIO NOTE — UN 1193 Product: Ethyl methyl ketone Class 3 / Flammable / ERG 127 PPE: Level B minimum with SCBA; splash-resistant suit and chemical-resistant gloves required ISOLATION: ERG 127: Isolate spill area 50m in all directions; for large spill isolate 150m, evacuate downwind 800m if tank/rail car involved in fire ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 1193 — Ethyl methyl ketone Class: 3 | Placard: Flammable | ERG Guide: 127 Appearance: Clear, colorless liquid with a sweet, sharp acetone-like odor. Highly volatile at room temperature. Water Reactivity: Soluble in water; no significant reaction Extinguishing: Use AFFF or alcohol-resistant foam where compatible, dry chemical or CO2 for Class B fires; water spray may be used to cool exposed containers. PPE: Level B minimum with SCBA; splash-resistant suit and chemical-resistant gloves required Isolation: ERG 127: Isolate spill area 50m in all directions; for large spill isolate 150m, evacuate downwind 800m if tank/rail car involved in fire — Key Hazards — • HIGHLY FLAMMABLE ketone solvent; vapors may ignite easily. • Vapors may form explosive mixtures with air and flash back to the source. • Vapors are heavier than air and may collect in low, confined or sewer areas. — First Actions — • CALL 911. Then call the emergency response telephone number on the shipping paper, if available. • Keep unauthorized personnel away. • Stay upwind, uphill and/or upstream. • Eliminate ignition sources if it is safe to do so. SOURCE: allfirefighter.com/hazmat/un/ethyl-methyl-ketone-un-1193 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN1193 Ethyl methyl ketone Cls3 ERG127 | allfirefighter.com/hazmat/un/ethyl-methyl-ketone-un-1193SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/ethyl-methyl-ketone-un-1193

Related UN Numbers in Class 3

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 1193

UN 1193 is Ethyl methyl ketone, a hazardous material assigned to ERG Guide 127.

Yes. It is highly flammable and vapors may form explosive mixtures with air.

ERG Guide 127 applies to UN 1193 and should be used for initial isolation, protective actions and first response guidance.

UN 1193 presents flammable vapor, flashback and sewer vapor-explosion hazards. Vapors are heavier than air, and exposure may irritate eyes, skin or respiratory tissue, especially in poorly ventilated areas.

Use positive-pressure SCBA for fire, heavy vapor or confined-space exposure. Chemical-resistant gloves, splash protection and protective clothing should be selected using SDS, product concentration and incident command.

Responders should isolate the area, stay upwind and uphill, eliminate ignition sources when safe, prevent sewer entry, verify the product with SDS and follow ERG Guide 127, incident command and local SOP.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.