☣️ UN 2301 • CLASS 3

UN 2301 — 2-Methylfuran

Placard: Flammable. ERG Guide 128. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 2301 is 2-Methylfuran, a Class 3 flammable liquid assigned to ERG Guide 128. It is a volatile, low-flash-point liquid that can quickly produce ignitable vapor at normal temperatures.

Hazard overview: UN 2301 presents a major flammable vapor hazard. 2-Methylfuran vapors can form explosive mixtures with air, travel along the ground to ignition sources and flash back to the spill area. Vapors may collect in sewers, basements, trenches or other confined spaces, and heated containers may rupture or explode.

Response guidance: For a UN 2301 incident, responders should confirm the product using shipping papers, container markings, SDS and ERG Guide 128. Establish incident command, isolate the area, stay upwind and uphill, eliminate ignition sources when safe, prevent runoff to sewers, and use appropriate foam, dry chemical or CO2 for fire control under local SOP.

Firefighter training notes: Training for UN 2301 should emphasize ERG 128, SDS and local SOP.

Regulatory context: 2-Methylfuran is regulated as a hazardous material; verify current requirements from shipping papers, SDS and applicable authorities.

Storage & handling: 2-Methylfuran should be stored according to SDS and local procedures.

Advertisement

UN 2301 Quick Details

UN 2301
Product name: 2-Methylfuran
DOT Class: 3
Placard type: Flammable
ERG Guide: 128 (check current ERG)
Initial isolation: ERG 128: isolate spill area minimum 50m all directions; if tank/rail car involved in fire, isolate 800m in all directions

Common Hazards of UN 2301

  • HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.
  • Vapors may form explosive mixtures with air.
  • Vapors may travel to an ignition source and flash back.
  • Vapors are heavier than air and may spread along the ground into low or confined areas.
  • Vapor explosion hazard exists indoors, outdoors or in sewers.
  • Runoff to sewers may create a fire or explosion hazard.
  • Containers may rupture or explode when heated.
  • 2-Methylfuran may polymerize or react dangerously when heated, contaminated or involved in fire conditions.

Chemical Identity & Physical Properties

2-Methylfuran is a colorless to pale yellow volatile liquid with an ether-like odor. It has a very low flash point, boils near 63-65°C, and produces vapors heavier than air that can move along the ground.

Also known as2-MethylfuranSylvanalpha-MethylfuranFuran, 2-methyl-
CAS Number534-22-5
AppearanceColorless to pale yellow liquid with an ethereal, ether-like odor. Volatile and highly flammable at room temperature.
Flash Point-30°C (-22°F)
Boiling Point63-65°C (145-149°F)
Vapor Density2.8 (heavier than air)
Water ReactivityInsoluble in water; no significant reactivity with water
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 2301

Extinguishing Media

Alcohol-resistant foam, dry chemical, CO2; water spray for cooling only

PPE Requirements

⚠️ Level B minimum with SCBA required; full chemical-resistant suit if large spill or confined space

Responders should use positive-pressure SCBA when vapors, fire gases or confined-space exposure may be present. Chemical-resistant protective clothing, gloves and eye protection should be selected according to ERG 128, SDS, monitoring results, incident command and local SOP.

Isolation & Evacuation

ERG 128: isolate spill area minimum 50m all directions; if tank/rail car involved in fire, isolate 800m in all directions
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 128).

First Actions for a UN 2301 Incident

  • CALL 911. Then call the emergency response telephone number on the shipping paper, if available.
  • Keep unauthorized personnel away.
  • Stay upwind, uphill and/or upstream.
  • Eliminate all ignition sources if it is safe to do so.
  • Do not touch damaged containers or spilled material unless properly trained and wearing appropriate protective equipment.
  • Avoid breathing vapors and avoid contact with liquid or contaminated surfaces.
  • Ventilate closed spaces before entering, but only if properly trained, equipped and authorized by incident command.
  • Isolate the spill or leak area for at least 50 meters (150 feet) in all directions.
  • Consider initial downwind evacuation for at least 300 meters (1000 feet) if fire, vapor cloud or large spill conditions are present.
Advertisement

📋 Copy & Share Field Card

UN 2301 — 2-Methylfuran
HAZMAT RADIO NOTE — UN 2301 Product: 2-Methylfuran Class 3 / Flammable / ERG 128 PPE: Level B minimum with SCBA required; full chemical-resistant suit if large spill or confined space ISOLATION: ERG 128: isolate spill area minimum 50m all directions; if tank/rail car involved in fire, isolate 800m in all directions ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 2301 — 2-Methylfuran Class: 3 | Placard: Flammable | ERG Guide: 128 Appearance: Colorless to pale yellow liquid with an ethereal, ether-like odor. Volatile and highly flammable at room temperature. Water Reactivity: Insoluble in water; no significant reactivity with water Extinguishing: Alcohol-resistant foam, dry chemical, CO2; water spray for cooling only PPE: Level B minimum with SCBA required; full chemical-resistant suit if large spill or confined space Isolation: ERG 128: isolate spill area minimum 50m all directions; if tank/rail car involved in fire, isolate 800m in all directions — Key Hazards — • HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. • Vapors may form explosive mixtures with air. • Vapors may travel to an ignition source and flash back. — First Actions — • CALL 911. Then call the emergency response telephone number on the shipping paper, if available. • Keep unauthorized personnel away. • Stay upwind, uphill and/or upstream. • Eliminate all ignition sources if it is safe to do so. SOURCE: allfirefighter.com/hazmat/un/methylfuran-un-2301 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN2301 2-Methylfuran Cls3 ERG128 | allfirefighter.com/hazmat/un/methylfuran-un-2301SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/methylfuran-un-2301

Related UN Numbers in Class 3

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 2301

UN 2301 is 2-Methylfuran, a Class 3 highly flammable liquid assigned to ERG Guide 128.

Yes. UN 2301 is highly flammable and can be ignited by heat, sparks, flames or hot surfaces.

2-Methylfuran vapors may form explosive mixtures with air, travel to ignition sources and flash back. Vapors can also collect in low or confined areas.

ERG Guide 128 applies to UN 2301 and should be used for initial isolation, fire response and protective action guidance.

The main hazards are rapid ignition, vapor explosion, flashback, sewer explosion risk, heated container rupture and possible hazardous reaction or polymerization under fire conditions.

Positive-pressure SCBA is recommended for vapor, fire or confined-space exposure. Chemical-resistant clothing and gloves should be selected using the SDS, ERG 128, monitoring results and local SOP.

Responders should isolate the area, keep people away, stay upwind and uphill, eliminate ignition sources, prevent liquid from entering sewers and follow ERG 128, shipping papers and incident command direction.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.