☣️ UN 2676 • CLASS 2

UN 2676 — Stibine

Placard: Toxic Gas. ERG Guide 119. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 2676 is Stibine, an extremely toxic flammable gas assigned to ERG Guide 119. Inhalation, flashback and low-area accumulation are critical hazards.

Hazard overview: EXTREMELY TOXIC and FLAMMABLE compressed gas; inhalation may be fatal. Gas can form explosive mixtures with air and flash back from ignition sources. Vapors are heavier than air and may collect in low or confined areas.

Response guidance: For UN 2676, isolate the release, eliminate ignition sources and use SCBA with chemical protection. Stop gas flow only if safe; do not extinguish a leaking gas fire unless flow can be stopped.

Firefighter training notes: Training for UN 2676 should emphasize toxic flammable gas behavior, source isolation, air monitoring, no-extinguishment-until-flow-stopped tactics, cylinder cooling and decontamination. Use ERG 119, SDS and local SOP.

Regulatory context: Stibine is regulated as a hazardous material for transport and emergency response. Storage, exposure, spill reporting, waste and fire-code duties depend on quantity, concentration and jurisdiction; verify shipping papers, SDS and local authority requirements.

Storage & handling: Stibine cylinders should be secured in a cool, ventilated toxic-gas storage area away from heat, ignition sources, physical damage and incompatible materials. Provide gas detection and emergency planning.

Advertisement

UN 2676 Quick Details

UN 2676
Product name: Stibine
DOT Class: 2
Placard type: Toxic Gas
ERG Guide: 119 (check current ERG)
Initial isolation: ERG 119: isolate 100m in all directions initially; if tank/rail car involved in fire isolate 800m and consider evacuation 1600m downwind

Common Hazards of UN 2676

  • EXTREMELY TOXIC and FLAMMABLE compressed gas; inhalation may be fatal.
  • Gas can form explosive mixtures with air and flash back from ignition sources.
  • Vapors are heavier than air and may collect in low or confined areas.
  • Liquefied gas contact can cause frostbite or cold burns.
  • Fire may produce antimony oxide fumes and other toxic gases.
  • Cylinders exposed to fire may vent, rupture or rocket.
  • Do not rely on odor as a safe warning of exposure.

Chemical Identity & Physical Properties

Colorless gas with an unpleasant, garlic-like or fishy odor. Heavier than air and may accumulate in low-lying areas.

Also known asAntimony hydrideAntimony trihydrideHydrogen antimonide
CAS Number7803-52-3
AppearanceColorless gas with an unpleasant, garlic-like or fishy odor. Heavier than air and may accumulate in low-lying areas.
Flash PointNot applicable (flammable gas)
Boiling Point-17C (1F)
Vapor Density4.35 (much heavier than air)
Water ReactivityDecomposes slowly in water, releasing antimony compounds
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 2676

Extinguishing Media

Do not extinguish a leaking gas fire unless flow can be stopped safely. Use dry chemical or CO2 for small fires and water spray only to cool cylinders.

PPE Requirements

⚠️ Level A required; full encapsulating suit with SCBA; extremely toxic by inhalation and skin absorption

Use positive-pressure SCBA and fully encapsulating chemical protective clothing for close entry or unknown concentrations. Protect against toxic gas, fire and frostbite.

Isolation & Evacuation

ERG 119: isolate 100m in all directions initially; if tank/rail car involved in fire isolate 800m and consider evacuation 1600m downwind
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 119).

First Actions for a UN 2676 Incident

  • Call 911 and the emergency response number on the shipping paper, if available.
  • Keep unauthorized personnel away and establish incident command.
  • Stay upwind and keep people out of low or poorly ventilated areas.
  • Eliminate ignition sources if safe and do not extinguish a leaking gas fire unless flow can be stopped.
  • Treat the release as an inhalation hazard until monitoring proves otherwise.
  • Do not touch leaking cylinders or liquefied gas without proper training and PPE.
  • Use ERG Guide 119, SDS, cylinder markings and air monitoring to set isolation, evacuation and entry decisions.
Advertisement

📋 Copy & Share Field Card

UN 2676 — Stibine
HAZMAT RADIO NOTE — UN 2676 Product: Stibine Class 2 / Toxic Gas / ERG 119 PPE: Level A required; full encapsulating suit with SCBA; extremely toxic by inhalation and skin absorption ISOLATION: ERG 119: isolate 100m in all directions initially; if tank/rail car involved in fire isolate 800m and consider evacuation 1600m downwind ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 2676 — Stibine Class: 2 | Placard: Toxic Gas | ERG Guide: 119 Appearance: Colorless gas with an unpleasant, garlic-like or fishy odor. Heavier than air and may accumulate in low-lying areas. Water Reactivity: Decomposes slowly in water, releasing antimony compounds Extinguishing: Do not extinguish a leaking gas fire unless flow can be stopped safely. Use dry chemical or CO2 for small fires and water spray only to cool cylinders. PPE: Level A required; full encapsulating suit with SCBA; extremely toxic by inhalation and skin absorption Isolation: ERG 119: isolate 100m in all directions initially; if tank/rail car involved in fire isolate 800m and consider evacuation 1600m downwind — Key Hazards — • EXTREMELY TOXIC and FLAMMABLE compressed gas; inhalation may be fatal. • Gas can form explosive mixtures with air and flash back from ignition sources. • Vapors are heavier than air and may collect in low or confined areas. — First Actions — • Call 911 and the emergency response number on the shipping paper, if available. • Keep unauthorized personnel away and establish incident command. • Stay upwind and keep people out of low or poorly ventilated areas. • Eliminate ignition sources if safe and do not extinguish a leaking gas fire unless flow can be stopped. SOURCE: allfirefighter.com/hazmat/un/stibine-un-2676 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN2676 Stibine Cls2 ERG119 | ERG 119: isolate 100m in all directions initially; if tank/rail car involved in | allfirefighter.com/hazmat/un/stibine-un-2676SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/stibine-un-2676

Related UN Numbers in Class 2

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 2676

UN 2676 is Stibine, assigned to ERG Guide 119.

Yes. Stibine is flammable and may form explosive mixtures with air.

EXTREMELY TOXIC and FLAMMABLE compressed gas; inhalation may be fatal. Gas can form explosive mixtures with air and flash back from ignition sources. Vapors are heavier than air and may collect in low or confined areas.

Use positive-pressure SCBA and fully encapsulating chemical protective clothing for close entry or unknown concentrations. Protect against toxic gas, fire and frostbite.

Do not extinguish a leaking gas fire unless flow can be stopped safely. Use dry chemical or CO2 for small fires and water spray only to cool cylinders.

Do not extinguish a leaking gas fire unless the gas flow can be stopped safely; otherwise an explosive cloud may form.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.