☣️ UN 2414 • CLASS 3

UN 2414 — Thiophene

Placard: Flammable. ERG Guide 130. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 2414 is Thiophene, a flammable sulfur-containing liquid assigned to ERG Guide 130. Strong odor does not replace SCBA or air monitoring.

Hazard overview: FLAMMABLE sulfur-containing liquid; vapors may ignite and form explosive mixtures with air. Strong odor may be noticed at low levels, but odor is not a safe exposure-control method. Vapors are heavier than air and may travel to ignition sources and flash back.

Response guidance: For UN 2414, isolate the area, eliminate ignition sources, keep vapors out of drains and use SCBA in vapor or fire conditions. Cool containers from a protected distance and choose foam, dry chemical or CO2 using SDS and ERG 130.

Firefighter training notes: Training for UN 2414 should emphasize toxic/corrosive exposure, SCBA use, skin-contact prevention, sewer flashback, decontamination, runoff control and foam selection. Use ERG 130, SDS and local SOP.

Regulatory context: Thiophene is regulated as a hazardous material for transport and emergency response. Storage, exposure, spill reporting, waste and fire-code duties depend on quantity, concentration and jurisdiction; verify shipping papers, SDS and local authority requirements.

Storage & handling: Thiophene should be stored in approved flammable/toxic or corrosive-liquid containers with ventilation, secondary containment and separation from heat, ignition sources, oxidizers and incompatible materials.

Advertisement

UN 2414 Quick Details

UN 2414
Product name: Thiophene
DOT Class: 3
Placard type: Flammable
ERG Guide: 130 (check current ERG)
Initial isolation: ERG 130: Small spill isolate 30m all directions; large spill isolate 150m all directions; for fire, evacuate 800m in all directions

Common Hazards of UN 2414

  • FLAMMABLE sulfur-containing liquid; vapors may ignite and form explosive mixtures with air.
  • Strong odor may be noticed at low levels, but odor is not a safe exposure-control method.
  • Vapors are heavier than air and may travel to ignition sources and flash back.
  • Liquid or vapor may irritate eyes, skin and respiratory tissue.
  • Fire may produce sulfur oxides, carbon monoxide and irritating/toxic smoke.
  • Runoff to sewers may create fire, explosion and odor/toxic contamination hazards.
  • Containers may rupture or explode when heated.

Chemical Identity & Physical Properties

Colorless to pale yellow liquid with a strong, disagreeable odor similar to benzene. Volatile liquid at room temperature.

Also known asThiofuranThiacyclopentadieneDivinylene sulfideCP 34
CAS Number110-02-1
AppearanceColorless to pale yellow liquid with a strong, disagreeable odor similar to benzene. Volatile liquid at room temperature.
Flash Point-1C (30F)
Boiling Point84C (183F)
Vapor Density2.9 (heavier than air)
Water ReactivityInsoluble in water; no significant reaction with water
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 2414

Extinguishing Media

Use alcohol-resistant foam or AFFF where suitable, dry chemical or CO2. Water spray may cool containers from a protected position; contain contaminated runoff.

PPE Requirements

⚠️ Level B minimum; SCBA required in confined spaces or high vapor concentrations; chemical-resistant gloves and clothing

Use positive-pressure SCBA for vapor, fire or confined-space exposure. Wear chemical-resistant gloves, eye/face protection and flame-resistant protection as appropriate.

Isolation & Evacuation

ERG 130: Small spill isolate 30m all directions; large spill isolate 150m all directions; for fire, evacuate 800m in all directions
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 130).

First Actions for a UN 2414 Incident

  • Call 911 and the emergency response number on the shipping paper, if available.
  • Keep unauthorized personnel away and establish incident command.
  • Stay upwind, uphill and upstream; keep responders out of low vapor areas.
  • Eliminate ignition sources if this can be done safely.
  • Avoid breathing vapor, mist or smoke and avoid skin or eye contact.
  • Do not touch damaged containers or spilled material without proper training and PPE.
  • Ventilate confined spaces only after monitoring and only if properly trained and equipped.
  • Use ERG Guide 130, SDS, shipping papers and air monitoring to set isolation, evacuation and entry decisions.
Advertisement

📋 Copy & Share Field Card

UN 2414 — Thiophene
HAZMAT RADIO NOTE — UN 2414 Product: Thiophene Class 3 / Flammable / ERG 130 PPE: Level B minimum; SCBA required in confined spaces or high vapor concentrations; chemical-resistant gloves and clothing ISOLATION: ERG 130: Small spill isolate 30m all directions; large spill isolate 150m all directions; for fire, evacuate 800m in all directions ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 2414 — Thiophene Class: 3 | Placard: Flammable | ERG Guide: 130 Appearance: Colorless to pale yellow liquid with a strong, disagreeable odor similar to benzene. Volatile liquid at room temperature. Water Reactivity: Insoluble in water; no significant reaction with water Extinguishing: Use alcohol-resistant foam or AFFF where suitable, dry chemical or CO2. Water spray may cool containers from a protected position; contain contaminated runoff. PPE: Level B minimum; SCBA required in confined spaces or high vapor concentrations; chemical-resistant gloves and clothing Isolation: ERG 130: Small spill isolate 30m all directions; large spill isolate 150m all directions; for fire, evacuate 800m in all directions — Key Hazards — • FLAMMABLE sulfur-containing liquid; vapors may ignite and form explosive mixtures with air. • Strong odor may be noticed at low levels, but odor is not a safe exposure-control method. • Vapors are heavier than air and may travel to ignition sources and flash back. — First Actions — • Call 911 and the emergency response number on the shipping paper, if available. • Keep unauthorized personnel away and establish incident command. • Stay upwind, uphill and upstream; keep responders out of low vapor areas. • Eliminate ignition sources if this can be done safely. SOURCE: allfirefighter.com/hazmat/un/thiophene-un-2414 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN2414 Thiophene Cls3 ERG130 | ERG 130: Small spill isolate 30m all directions; large spill isolate 150m all di | allfirefighter.com/hazmat/un/thiophene-un-2414SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/thiophene-un-2414

Related UN Numbers in Class 3

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 2414

UN 2414 is Thiophene, assigned to ERG Guide 130.

Yes. Thiophene is flammable and its vapors may form explosive mixtures with air.

FLAMMABLE sulfur-containing liquid; vapors may ignite and form explosive mixtures with air. Strong odor may be noticed at low levels, but odor is not a safe exposure-control method. Vapors are heavier than air and may travel to ignition sources and flash back.

Use positive-pressure SCBA for vapor, fire or confined-space exposure. Wear chemical-resistant gloves, eye/face protection and flame-resistant protection as appropriate.

Use alcohol-resistant foam or AFFF where suitable, dry chemical or CO2. Water spray may cool containers from a protected position; contain contaminated runoff.

Heavy flammable vapors can move through drains or sewers and ignite remotely, causing flashback or vapor explosion.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.