☣️ UN 0048 • CLASS 1

UN 0048 — Charges, demolition

Placard: Explosive 1.1D. ERG Guide 112. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 0048 is Charges, demolition, a Class 1 explosive assigned to ERG Guide 112. This entry should be treated as a high-consequence explosive hazard where isolation, evacuation and qualified explosive ordnance support are the primary responder priorities.

Hazard overview: UN 0048 presents a mass explosion hazard when exposed to fire, impact, shock, friction or other initiating conditions. A detonation may involve the entire load and produce severe blast pressure, fragmentation and secondary debris. Responders should not rely on normal firefighting PPE as protection from blast effects.

Response guidance: For a UN 0048 incident, responders should confirm the material using shipping papers, placards, package markings and ERG Guide 112. Establish incident command, isolate the area, deny entry, request law enforcement and EOD support, and withdraw personnel if fire involves the explosive material or containers.

Firefighter training notes: Training should emphasize recognizing Class 1 explosive placards, establishing command early, using standoff distance, denying entry and requesting bomb squad or EOD support. Common tactical errors include approaching packages for identification, moving damaged items, fighting fire too close and underestimating fragmentation distance. Use ERG 112, shipping papers and local explosive incident SOP.

Regulatory context: Charges, demolition is regulated as a Class 1 explosive hazardous material. Transport, storage, reporting and scene-control requirements may involve DOT, ATF, OSHA, military, state or local authorities depending on ownership and quantity. Responders should verify requirements through shipping papers, facility documents, law enforcement and current regulations.

Storage & handling: Charges, demolition should be stored only in approved explosive magazines or authorized storage areas, separated from ignition sources, incompatible materials and unauthorized access. Packages should be protected from heat, impact, friction, moisture where relevant and physical damage according to product documentation and applicable explosive storage regulations.

Advertisement

UN 0048 Quick Details

UN 0048
Product name: Charges, demolition
DOT Class: 1
Placard type: Explosive 1.1D
ERG Guide: 112 (check current ERG)
Initial isolation: ERG 112: Isolate minimum 500m (1600 ft) in all directions. Evacuate 1600m (1 mile) radius if fire or imminent detonation

Common Hazards of UN 0048

  • Mass explosion hazard; the entire load may detonate simultaneously if initiated.
  • Severe blast overpressure, fragmentation and debris may extend far beyond the immediate container or vehicle.
  • Explosive articles or substances may be sensitive to heat, shock, friction, impact or fire exposure.
  • Fire involving the material can transition rapidly to detonation without reliable warning.
  • Secondary fires, projectiles and container fragments may create hazards after an initial event.
  • Smoke from fire may contain irritating or toxic combustion products.

Chemical Identity & Physical Properties

Solid explosive devices typically consisting of high explosives molded or packed in metal, plastic, or fiber casings. Appearance varies by design—may be cylindrical, rectangular, or custom-shaped blocks.

Also known asDemolition chargesExplosive demolition devicesShaped chargesBreaching charges
AppearanceSolid explosive devices typically consisting of high explosives molded or packed in metal, plastic, or fiber casings. Appearance varies by design—may be cylindrical, rectangular, or custom-shaped blocks.
Flash PointNot applicable (explosive solid)
Boiling PointNot applicable (decomposes/detonates)
Vapor DensityNot applicable (solid)
Water ReactivityNo significant reaction with water; however, water does not prevent detonation
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 0048

Extinguishing Media

Do not fight fire involving explosives at close range. Use unmanned master streams or remote cooling only if directed by incident command and safe under local SOP.

PPE Requirements

⚠️ No standard PPE protects against blast and fragmentation. Use distance, cover, evacuation, SCBA for smoke exposure and EOD/bomb squad support for any approach.

For UN 0048, distance, cover and evacuation are more important than close-range PPE. Structural firefighting gear and SCBA may be used only for remote exposure protection or support roles; direct approach or handling should be limited to qualified EOD or explosive specialists under incident command.

Isolation & Evacuation

ERG 112: Isolate minimum 500m (1600 ft) in all directions. Evacuate 1600m (1 mile) radius if fire or imminent detonation
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 112).

First Actions for a UN 0048 Incident

  • CALL 911. Then call the emergency response telephone number on the shipping paper, if available.
  • Keep unauthorized personnel away and deny entry to the hazard area.
  • Stage responders upwind, uphill and outside the recommended isolation distance.
  • Request law enforcement, bomb squad or EOD, hazmat and additional command resources immediately.
  • Do not handle, move or disturb explosive articles unless directed by qualified explosive ordnance personnel.
  • Do not fight fire involving explosives at close range; withdraw and protect life safety first.
  • Protect exposures only from a safe, remote position if directed by incident command and local SOP.
  • Use ERG Guide 112, shipping papers and incident command to set isolation and evacuation distances.
Advertisement

📋 Copy & Share Field Card

UN 0048 — Charges, demolition
HAZMAT RADIO NOTE — UN 0048 Product: Charges, demolition Class 1 / Explosive 1.1D / ERG 112 PPE: No standard PPE protects against blast and fragmentation. Use distance, cover, evacuation, SCBA for smoke exposure and EOD/bomb squad support for any approach. ISOLATION: ERG 112: Isolate minimum 500m (1600 ft) in all directions. Evacuate 1600m (1 mile) radius if fire or imminent detonation ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 0048 — Charges, demolition Class: 1 | Placard: Explosive 1.1D | ERG Guide: 112 Appearance: Solid explosive devices typically consisting of high explosives molded or packed in metal, plastic, or fiber casings. Appearance varies by design—may be cylindrical, rectangular, or custom-shaped blocks. Water Reactivity: No significant reaction with water; however, water does not prevent detonation Extinguishing: Do not fight fire involving explosives at close range. Use unmanned master streams or remote cooling only if directed by incident command and safe under local SOP. PPE: No standard PPE protects against blast and fragmentation. Use distance, cover, evacuation, SCBA for smoke exposure and EOD/bomb squad support for any approach. Isolation: ERG 112: Isolate minimum 500m (1600 ft) in all directions. Evacuate 1600m (1 mile) radius if fire or imminent detonation — Key Hazards — • Mass explosion hazard; the entire load may detonate simultaneously if initiated. • Severe blast overpressure, fragmentation and debris may extend far beyond the immediate container or vehicle. • Explosive articles or substances may be sensitive to heat, shock, friction, impact or fire exposure. — First Actions — • CALL 911. Then call the emergency response telephone number on the shipping paper, if available. • Keep unauthorized personnel away and deny entry to the hazard area. • Stage responders upwind, uphill and outside the recommended isolation distance. • Request law enforcement, bomb squad or EOD, hazmat and additional command resources immediately. SOURCE: allfirefighter.com/hazmat/un/charges-demolition-un-0048 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN0048 Charges, demolition Cls1 ERG112 | allfirefighter.com/hazmat/un/charges-demolition-un-0048SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/charges-demolition-un-0048

Related UN Numbers in Class 1

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 0048

UN 0048 is Charges, demolition, a Class 1 explosive assigned to ERG Guide 112.

Yes. UN 0048 should be treated as capable of severe blast and fragmentation; some conditions may allow the entire load to detonate.

ERG Guide 112 applies to UN 0048 and should be used for initial isolation, evacuation and first response decisions.

The main hazards are blast overpressure, fragmentation, fire involvement, shock or heat sensitivity and secondary debris or smoke hazards.

No standard firefighter PPE protects against a close-range detonation. Responders should use distance, cover and evacuation, with EOD or explosive specialists handling any approach.

Keep people away, stage upwind and outside the isolation zone, request law enforcement and EOD support, avoid moving the material and follow ERG 112, shipping papers and incident command.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.