☣️ UN 1044 • CLASS 2
Fire extinguishers with compressed or liquefied gas
Placard: Non-Flammable Gas. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.
🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.
Advertisement
Quick details
UN 1044
Class: 2
Placard type: Non-Flammable Gas
ERG: Guide 126 (check current ERG)
Isolation: ERG 126: isolate spill/leak area immediately for at least 25-50m in all directions; if fire or large leak, consider initial evacuation for 800m in all directions
Chemical & Response Details
| Also known as | compressed gas fire extinguishersliquefied gas fire extinguishersportable fire extinguisherspressurized fire extinguisher unitsgas-charged fire suppression devices |
| Appearance | Metal cylinders of various sizes containing compressed or liquefied gases (CO2, halon, halogenated agents, or nitrogen). May be red, chrome, or other colors depending on agent type. Cylindrical pressure vessels with discharge nozzle/horn. |
| Flash Point | Not applicable (pressurized gas device) |
| Boiling Point | Not applicable (varies by extinguishing agent) |
| Vapor Density | Not applicable (pressurized container) |
| Water Reactivity | No significant reaction with container; contents depend on specific extinguishing agent |
| Extinguishing | Do not apply external agents to intact cylinders; if ruptured treat based on contents (CO2, dry chemical, or halogenated agent) |
| PPE | ⚠️ Level D for intact units; Level C minimum if cylinders ruptured or leaking; SCBA if fire involved or enclosed space |
| Isolation | ERG 126: isolate spill/leak area immediately for at least 25-50m in all directions; if fire or large leak, consider initial evacuation for 800m in all directions |
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.
Common hazards (high level)
- Some may burn but none ignite readily.
- Containers may explode when heated.
- Ruptured cylinders may rocket.
- Vapors may cause dizziness or asphyxiation without warning, especially when in closed or confined areas.
- Vapors from liquefied gas are initially heavier than air and spread along ground.
- Contact with gas or liquefied gas may cause burns, severe injury and/or frostbite.
- Fire may produce irritating, corrosive and/or toxic gases.
First actions (field-minded)
- CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
- Keep unauthorized personnel away.
- Stay upwind, uphill and/or upstream.
- Many gases are heavier than air and will spread along the ground and collect in low or confined areas
- Ventilate closed spaces before entering, but only if properly trained and equipped.
- Isolate spill or leak area for at least 100 meters (330 feet) in all directions.
- Consider initial downwind evacuation for at least 500 meters (1/3 mile).
Advertisement
📋 Copy & Share
UN 1044 — Fire extinguishers with compressed or li HAZMAT RADIO NOTE — UN 1044
Product: Fire extinguishers with compressed or liquefied gas
Class 2 / Non-Flammable Gas / ERG 126
PPE: Level D for intact units; Level C minimum if cylinders ruptured or leaking; SCBA if fire involved or enclosed space
ISOLATION: ERG 126: isolate spill/leak area immediately for at least 25-50m in all directions; if fire or large leak, consider initial evacuation for 800m in all directions
ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO
Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.
=== IC HAZMAT BRIEFING ===
UN 1044 — Fire extinguishers with compressed or liquefied gas
Class: 2 | Placard: Non-Flammable Gas | ERG Guide: 126
Appearance: Metal cylinders of various sizes containing compressed or liquefied gases (CO2, halon, halogenated agents, or nitrogen). May be red, chrome, or other colors depending on agent type. Cylindrical pressure vessels with discharge nozzle/horn.
Water Reactivity: No significant reaction with container; contents depend on specific extinguishing agent
Extinguishing: Do not apply external agents to intact cylinders; if ruptured treat based on contents (CO2, dry chemical, or halogenated agent)
PPE: Level D for intact units; Level C minimum if cylinders ruptured or leaking; SCBA if fire involved or enclosed space
Isolation: ERG 126: isolate spill/leak area immediately for at least 25-50m in all directions; if fire or large leak, consider initial evacuation for 800m in all directions
— Key Hazards —
• Some may burn but none ignite readily.
• Containers may explode when heated.
• Ruptured cylinders may rocket.
— First Actions —
• CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
• Keep unauthorized personnel away.
• Stay upwind, uphill and/or upstream.
• Many gases are heavier than air and will spread along the ground and collect in low or confined areas
SOURCE: allfirefighter.com/hazmat/un/1044 | Always use current ERG + SOP/SOGIC BRIEFING
Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief. Full chemical + response details.
UN1044 Fire extinguishers with compressed or liquefied gas Cls2 ERG126 | allfirefighter.com/hazmat/un/1044SMS / 160 CHAR
Use for: Quick text to command or incoming units. Fits in a single SMS. Includes link to full page.
⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/1044
Advertisement
FAQ
Some may burn but none ignite readily. Containers may explode when heated. Ruptured cylinders may rocket. Vapors may cause dizziness or asphyxiation without warning, especially when in closed or confined areas. Vapors from liquefied gas are initially heavier than air and spread along ground. Contact with gas or liquefied gas may cause burns, severe injury and/or frostbite. Fire may produce irritating, corrosive and/or toxic gases.
CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper Keep unauthorized personnel away. Stay upwind, uphill and/or upstream.
Level D for intact units; Level C minimum if cylinders ruptured or leaking; SCBA if fire involved or enclosed space
No. This is a training/quick-reference aid only. Always consult the current ERG Guide 126 and your department SOP/SOG for incident-specific protective actions.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.