UN 2380 — Dimethyldiethoxysilane
Placard: Flammable. ERG Guide 127. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.
UN 2380 is Dimethyldiethoxysilane, a flammable alkoxysilane assigned to ERG Guide 127. It can hydrolyze slowly while vapors create flashback hazards.
Hazard overview: FLAMMABLE alkoxysilane liquid; vapors may ignite and form explosive mixtures with air. Vapors are heavier than air and may travel to ignition sources and flash back. Hydrolyzes slowly with water or moisture, producing alcohol and siloxane products.
Response guidance: For UN 2380, isolate the area, eliminate ignition sources, keep vapors out of drains and use SCBA in vapor or fire conditions. Cool containers from a protected distance and choose foam, dry chemical or CO2 using SDS and ERG 127.
Firefighter training notes: Training for UN 2380 should emphasize vapor travel, low-area accumulation, sewer flashback, foam selection, ignition control, container cooling and vapor monitoring. Use ERG 127, SDS and local SOP.
Regulatory context: Dimethyldiethoxysilane is regulated as a hazardous material for transport and emergency response. Storage, exposure, spill reporting, waste and fire-code duties depend on quantity, concentration and jurisdiction; verify shipping papers, SDS and local authority requirements.
Storage & handling: Dimethyldiethoxysilane should be stored in approved flammable-liquid containers with ventilation, bonding/grounding where required, spill containment and separation from heat, ignition sources, oxidizers and incompatible materials.
UN 2380 Quick Details
Common Hazards of UN 2380
- FLAMMABLE alkoxysilane liquid; vapors may ignite and form explosive mixtures with air.
- Vapors are heavier than air and may travel to ignition sources and flash back.
- Hydrolyzes slowly with water or moisture, producing alcohol and siloxane products.
- Vapor explosion hazard exists in drains, basements and confined areas.
- Runoff to sewers may create fire or explosion hazards.
- Fire may produce silicon oxides, carbon monoxide and irritating smoke.
- Containers may rupture or explode when heated.
Chemical Identity & Physical Properties
Colorless liquid with a mild, characteristic odor. Liquid at room temperature with relatively low viscosity.
| Also known as | DiethoxydimethylsilaneDimethyldiethoxysilaneDMDEOSSilane, diethoxydimethyl- |
| CAS Number | 78-62-6 |
| Appearance | Colorless liquid with a mild, characteristic odor. Liquid at room temperature with relatively low viscosity. |
| Flash Point | -7°C (19°F) |
| Boiling Point | 113-114°C (235-237°F) |
| Vapor Density | 4.6 (heavier than air) |
| Water Reactivity | Hydrolyzes slowly in water, producing ethanol and siloxanes; not violently reactive |
Fireground Response Guidance — UN 2380
Extinguishing Media
PPE Requirements
Use positive-pressure SCBA for vapor, fire or confined-space exposure. Wear chemical-resistant gloves, eye/face protection and flame-resistant protection as appropriate.
Isolation & Evacuation
First Actions for a UN 2380 Incident
- Call 911 and the emergency response number on the shipping paper, if available.
- Keep unauthorized personnel away and establish incident command.
- Stay upwind, uphill and upstream; keep responders out of low vapor areas.
- Eliminate ignition sources if this can be done safely.
- Avoid breathing vapor, mist or smoke and avoid skin or eye contact.
- Do not touch damaged containers or spilled material without proper training and PPE.
- Ventilate confined spaces only after monitoring and only if properly trained and equipped.
- Use ERG Guide 127, SDS, shipping papers and air monitoring to set isolation, evacuation and entry decisions.
📋 Copy & Share Field Card
UN 2380 — DimethyldiethoxysilaneUse for: Quick radio or face-to-face size-up. Short, structured, field-ready.
Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.
Use for: Quick text to command or incoming units. Fits in a single SMS.