UN 0456 — Detonators, electric, for blasting
Placard: Explosive 1.4B. ERG Guide 114. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.
UN 0456 is Detonators, electric, for blasting, a Class 1.4 explosive article assigned to ERG Guide 114. It is a limited-effect initiator-type article, but heat, shock, static or damage can still create a dangerous localized blast hazard.
Hazard overview: UN 0456 presents a localized initiator hazard. Heat, impact, friction, static, electrical energy or mechanical disturbance may cause popping, deflagration or small blast effects, and grouped articles can still injure nearby personnel.
Response guidance: For a UN 0456 incident, responders should confirm the article using shipping papers, markings and ERG Guide 114. Isolate the area, avoid disturbing leads or damaged units, control ignition and static sources when safe, and request explosive specialists if condition or quantity is uncertain.
Firefighter training notes: Training should emphasize the difference between limited-effect explosives and higher-hazard Class 1 materials. Common errors include standing too close to heated packages, dismissing smoke hazards, disturbing damaged articles and failing to check for adjacent explosives or ammunition.
Regulatory context: Detonators, electric, for blasting is regulated as a Class 1 explosive hazardous material. Transportation, storage, quantity limits, fire code controls and reporting requirements may vary by jurisdiction. Responders should verify current requirements through shipping papers, SDS or product documents and applicable DOT, ATF, OSHA, NFPA, military, state or local authority guidance.
Storage & handling: Detonators, electric, for blasting should be stored only in approved packaging, magazines or authorized explosive storage areas, separated from ignition sources, incompatible materials and unauthorized access. Packages should be protected from heat, impact, friction, moisture where relevant and physical damage according to product documentation and applicable explosive storage regulations.
UN 0456 Quick Details
Common Hazards of UN 0456
- Minor explosive hazard with localized blast, popping or fragment effects possible if initiated.
- Initiating components may be sensitive to heat, impact, friction, static or electrical energy depending on design.
- Smoke and heat from burning articles may irritate the eyes and respiratory tract.
- Low mass explosion risk under normal transport conditions, but grouped articles can still injure nearby personnel.
- Heated packages may fail and scatter small articles or fragments.
- Nearby explosives, ammunition or pyrotechnics may increase the overall incident hazard.
Chemical Identity & Physical Properties
Small metal or plastic cylindrical devices containing a primary explosive charge and electric ignition system. Typically metallic appearance with attached electrical wires.
| Also known as | Electric blasting capsElectric detonatorsElectric initiatorsBlasting detonators |
| Appearance | Small metal or plastic cylindrical devices containing a primary explosive charge and electric ignition system. Typically metallic appearance with attached electrical wires. |
| Flash Point | Not applicable (explosive article) |
| Boiling Point | Not applicable (explosive article) |
| Vapor Density | Not applicable (solid article) |
| Water Reactivity | No significant reaction with water, but keep dry to maintain electrical integrity |
Fireground Response Guidance — UN 0456
Extinguishing Media
PPE Requirements
Structural firefighting protective clothing with SCBA is appropriate for fire or smoke exposure, with distance maintained from heated packages. Approach and handling should follow incident command and local SOP.
Isolation & Evacuation
First Actions for a UN 0456 Incident
- CALL 911. Notify law enforcement if explosive articles, ordnance or blasting components are involved.
- Keep unauthorized personnel away.
- Stage upwind and avoid smoke from burning articles.
- Avoid radios, static sources, electrical leads or mechanical disturbance around suspected initiators unless cleared by specialists.
- Eliminate ignition sources if it is safe to do so.
- Isolate the area and expand the perimeter if fire grows or additional explosives are present.
- Use ERG Guide 114, shipping papers and incident command for isolation and fire response decisions.
📋 Copy & Share Field Card
UN 0456 — Detonators, electric, for blastingUse for: Quick radio or face-to-face size-up. Short, structured, field-ready.
Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.
Use for: Quick text to command or incoming units. Fits in a single SMS.