☣️ UN 0103 • CLASS 1
UN 0103 — Fuse, igniter, tubular, metal clad
Placard: Explosive 1.4G. ERG Guide 114. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.
🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.
Advertisement
UN 0103 Quick Details
UN 0103
Product name: Fuse, igniter, tubular, metal clad
DOT Class: 1
Placard type: Explosive 1.4G
ERG Guide: 114 (check current ERG)
Initial isolation: ERG 114: Isolate 500m (1640 ft) in all directions if large fire; evacuate area if article is involved in fire
Common Hazards of UN 0103
- Minor blast or fire hazard — limited effect.
- Localized burning or deflagration possible.
- Smoke and heat from burning.
- Low mass explosion risk under normal conditions.
Chemical Identity & Physical Properties
| Also known as | Tubular metal-clad igniterMetal clad tubular fusePyrotechnic igniter fuseOrdnance fuse assembly |
| Appearance | Metal-encased tubular device containing pyrotechnic composition. Typically cylindrical with metal cladding, designed for controlled ignition timing in ordnance systems. |
| Flash Point | Not applicable (pyrotechnic article) |
| Boiling Point | Not applicable (pyrotechnic article) |
| Vapor Density | Not applicable (solid article) |
| Water Reactivity | Generally stable; avoid prolonged water exposure which may degrade pyrotechnic composition |
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.
Fireground Response Guidance — UN 0103
Extinguishing Media
Water spray for cooling, dry chemical, CO2 for small fires; do not fight large fires
PPE Requirements
⚠️ Structural firefighters' protective clothing provides limited protection; minimum Level D for inspection; distance recommended for fire involvement
Isolation & Evacuation
ERG 114: Isolate 500m (1640 ft) in all directions if large fire; evacuate area if article is involved in fire
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 114).
First Actions for a UN 0103 Incident
- CALL 911. Notify law enforcement.
- Isolate area; keep unauthorized personnel away.
- Stage upwind; eliminate ignition sources.
- Request Hazmat + law enforcement.
- Consult current ERG Guide 114 and follow SOP/SOG.
Advertisement
📋 Copy & Share Field Card
UN 0103 — Fuse, igniter, tubular, metal cladHAZMAT RADIO NOTE — UN 0103
Product: Fuse, igniter, tubular, metal clad
Class 1 / Explosive 1.4G / ERG 114
PPE: Structural firefighters' protective clothing provides limited protection; minimum Level D for inspection; distance recommended for fire involvement
ISOLATION: ERG 114: Isolate 500m (1640 ft) in all directions if large fire; evacuate area if article is involved in fire
ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO
Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.
=== IC HAZMAT BRIEFING ===
UN 0103 — Fuse, igniter, tubular, metal clad
Class: 1 | Placard: Explosive 1.4G | ERG Guide: 114
Appearance: Metal-encased tubular device containing pyrotechnic composition. Typically cylindrical with metal cladding, designed for controlled ignition timing in ordnance systems.
Water Reactivity: Generally stable; avoid prolonged water exposure which may degrade pyrotechnic composition
Extinguishing: Water spray for cooling, dry chemical, CO2 for small fires; do not fight large fires
PPE: Structural firefighters' protective clothing provides limited protection; minimum Level D for inspection; distance recommended for fire involvement
Isolation: ERG 114: Isolate 500m (1640 ft) in all directions if large fire; evacuate area if article is involved in fire
— Key Hazards —
• Minor blast or fire hazard — limited effect.
• Localized burning or deflagration possible.
• Smoke and heat from burning.
— First Actions —
• CALL 911. Notify law enforcement.
• Isolate area; keep unauthorized personnel away.
• Stage upwind; eliminate ignition sources.
• Request Hazmat + law enforcement.
SOURCE: allfirefighter.com/hazmat/un/0103 | Always use current ERG + SOP/SOGIC BRIEFING
Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief. Full chemical + response details.
UN0103 Fuse, igniter, tubular, metal clad Cls1 ERG114 | allfirefighter.com/hazmat/un/0103SMS / 160 CHAR
Use for: Quick text to command or incoming units. Fits in a single SMS. Includes link to full page.
⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions.
Page: https://allfirefighter.com/hazmat/un/0103
Related UN Numbers in Class 1
Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement
Frequently Asked Questions about UN 0103
Minor blast or fire hazard — limited effect. Localized burning or deflagration possible. Smoke and heat from burning. Low mass explosion risk under normal conditions.
CALL 911. Notify law enforcement. Isolate area; keep unauthorized personnel away. Stage upwind; eliminate ignition sources.
Structural firefighters' protective clothing provides limited protection; minimum Level D for inspection; distance recommended for fire involvement
Water reactivity: Generally stable; avoid prolonged water exposure which may degrade pyrotechnic composition. Recommended extinguishing: Water spray for cooling, dry chemical, CO2 for small fires; do not fight large fires.
ERG Guide 114 recommendation: ERG 114: Isolate 500m (1640 ft) in all directions if large fire; evacuate area if article is involved in fire
No. This is a training/quick-reference aid only. Always consult the current ERG Guide 114 and your department SOP/SOG for incident-specific protective actions.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles.
This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.