☣️ UN 0174 • CLASS 1

Rivets, explosive

Placard: Explosive 1.4S. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.
Advertisement
Quick details
UN 0174
Class: 1
Placard type: Explosive 1.4S
ERG: Guide 114 (check current ERG)
Isolation: ERG 114: isolate 200m in all directions; if fire or large spill, isolate 800m and evacuate 800m downwind
Chemical & Response Details
Also known asExplosive rivetsPyrotechnic rivetsBlasting rivetsDetonating rivets
AppearanceMetallic rivets containing small explosive charges, typically appearing as standard fasteners with integral explosive components. Solid metal devices at room temperature.
Flash PointNot applicable (explosive article)
Boiling PointNot applicable (explosive article)
Vapor DensityNot applicable (solid article)
Water ReactivityNo significant reaction with water under normal conditions
ExtinguishingDry chemical, sand, or water spray from distance; avoid direct high-pressure streams
PPE⚠️ Minimum Level D for handling intact units; Level C with SCBA if fire exposure or damaged units present
IsolationERG 114: isolate 200m in all directions; if fire or large spill, isolate 800m and evacuate 800m downwind
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.
Common hazards (high level)
  • Minor blast or fire hazard — limited effect.
  • Localized burning or deflagration possible.
  • Smoke and heat from burning.
  • Low mass explosion risk under normal conditions.
First actions (field-minded)
  • CALL 911. Notify law enforcement.
  • Isolate area; keep unauthorized personnel away.
  • Stage upwind; eliminate ignition sources.
  • Request Hazmat + law enforcement.
  • Consult current ERG Guide 114 and follow SOP/SOG.
Advertisement
📋 Copy & Share
UN 0174 — Rivets, explosive
HAZMAT RADIO NOTE — UN 0174 Product: Rivets, explosive Class 1 / Explosive 1.4S / ERG 114 PPE: Minimum Level D for handling intact units; Level C with SCBA if fire exposure or damaged units present ISOLATION: ERG 114: isolate 200m in all directions; if fire or large spill, isolate 800m and evacuate 800m downwind ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 0174 — Rivets, explosive Class: 1 | Placard: Explosive 1.4S | ERG Guide: 114 Appearance: Metallic rivets containing small explosive charges, typically appearing as standard fasteners with integral explosive components. Solid metal devices at room temperature. Water Reactivity: No significant reaction with water under normal conditions Extinguishing: Dry chemical, sand, or water spray from distance; avoid direct high-pressure streams PPE: Minimum Level D for handling intact units; Level C with SCBA if fire exposure or damaged units present Isolation: ERG 114: isolate 200m in all directions; if fire or large spill, isolate 800m and evacuate 800m downwind — Key Hazards — • Minor blast or fire hazard — limited effect. • Localized burning or deflagration possible. • Smoke and heat from burning. — First Actions — • CALL 911. Notify law enforcement. • Isolate area; keep unauthorized personnel away. • Stage upwind; eliminate ignition sources. • Request Hazmat + law enforcement. SOURCE: allfirefighter.com/hazmat/un/0174 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief. Full chemical + response details.

SMS (short)
UN0174 Rivets, explosive Cls1 ERG114 | ERG 114: isolate 200m in all directions; if fire or large spill, isolate 800m an | allfirefighter.com/hazmat/un/0174SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS. Includes link to full page.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/0174
Related UN numbers (same class)
Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

FAQ

Minor blast or fire hazard — limited effect. Localized burning or deflagration possible. Smoke and heat from burning. Low mass explosion risk under normal conditions.

CALL 911. Notify law enforcement. Isolate area; keep unauthorized personnel away. Stage upwind; eliminate ignition sources.

Minimum Level D for handling intact units; Level C with SCBA if fire exposure or damaged units present

No. This is a training/quick-reference aid only. Always consult the current ERG Guide 114 and your department SOP/SOG for incident-specific protective actions.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.