☣️ UN 2586 • CLASS 8

Alkyl sulphonic acids, liquid, with not more than 5% free sulphuric acid

Placard: Corrosive. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.
Advertisement
Quick details
UN 2586
Class: 8
Placard type: Corrosive
ERG: Guide 153 (check current ERG)
Isolation: ERG 153: isolate spill 25-50m all directions; evacuate immediate area if large spill or fire
Chemical & Response Details
Also known asalkylsulfonic acidsalkanesulfonic acidsorganic sulfonic acidsRSO3H compounds
AppearanceCorrosive liquid, typically colorless to pale yellow, with a pungent acidic odor. Viscosity varies depending on alkyl chain length.
Flash PointVaries by specific compound, typically >100°C (212°F) for most alkyl sulfonics
Boiling PointDecomposes before boiling, typically decomposes above 150-200°C (302-392°F)
Vapor DensityGreater than 1 (heavier than air)
Water ReactivityDissolves in water with heat generation; corrosive solution formed
ExtinguishingDry chemical, CO2, or water fog; avoid direct water streams due to splashing
PPE⚠️ Level B minimum; full-face SCBA required; acid-resistant suit, gloves, and boots mandatory
IsolationERG 153: isolate spill 25-50m all directions; evacuate immediate area if large spill or fire
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.
Common hazards (high level)
  • TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury
  • Methyl bromoacetate (UN2643) is an eye irritant/lachrymator (causes flow of tears).
  • Contact with molten substance may cause severe burns to skin and eyes.
  • Avoid any skin contact.
  • Fire may produce irritating, corrosive and/or toxic gases.
  • Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental
  • Combustible material: may burn but does not ignite readily.
  • When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion
First actions (field-minded)
  • CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
  • Keep unauthorized personnel away.
  • Stay upwind, uphill and/or upstream.
  • Ventilate closed spaces before entering, but only if properly trained and equipped.
  • Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters
  • For highlighted materials: see Table 1 - Initial Isolation and Protective Action Distances.
  • For non-highlighted materials: increase the immediate precautionary measure distance, in the downwind
Advertisement
📋 Copy & Share
UN 2586 — Alkyl sulphonic acids, liquid, with not
HAZMAT RADIO NOTE — UN 2586 Product: Alkyl sulphonic acids, liquid, with not more than 5% free sulphuric acid Class 8 / Corrosive / ERG 153 PPE: Level B minimum; full-face SCBA required; acid-resistant suit, gloves, and boots mandatory ISOLATION: ERG 153: isolate spill 25-50m all directions; evacuate immediate area if large spill or fire ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 2586 — Alkyl sulphonic acids, liquid, with not more than 5% free sulphuric acid Class: 8 | Placard: Corrosive | ERG Guide: 153 Appearance: Corrosive liquid, typically colorless to pale yellow, with a pungent acidic odor. Viscosity varies depending on alkyl chain length. Water Reactivity: Dissolves in water with heat generation; corrosive solution formed Extinguishing: Dry chemical, CO2, or water fog; avoid direct water streams due to splashing PPE: Level B minimum; full-face SCBA required; acid-resistant suit, gloves, and boots mandatory Isolation: ERG 153: isolate spill 25-50m all directions; evacuate immediate area if large spill or fire — Key Hazards — • TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury • Methyl bromoacetate (UN2643) is an eye irritant/lachrymator (causes flow of tears). • Contact with molten substance may cause severe burns to skin and eyes. — First Actions — • CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper • Keep unauthorized personnel away. • Stay upwind, uphill and/or upstream. • Ventilate closed spaces before entering, but only if properly trained and equipped. SOURCE: allfirefighter.com/hazmat/un/2586 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief. Full chemical + response details.

SMS (short)
UN2586 Alkyl sulphonic acids, liquid, with not more than 5% free sulphuric acid Cls8 ERG153 | allfirefighter.com/hazmat/un/2586SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS. Includes link to full page.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/2586
Related UN numbers (same class)
Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

FAQ

TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury Methyl bromoacetate (UN2643) is an eye irritant/lachrymator (causes flow of tears). Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion

CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper Keep unauthorized personnel away. Stay upwind, uphill and/or upstream.

Level B minimum; full-face SCBA required; acid-resistant suit, gloves, and boots mandatory

No. This is a training/quick-reference aid only. Always consult the current ERG Guide 153 and your department SOP/SOG for incident-specific protective actions.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.