☣️ UN 2677 • CLASS 8

UN 2677 — Rubidium hydroxide, solution

Placard: Corrosive. ERG Guide 154. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.
Advertisement

UN 2677 Quick Details

UN 2677
Product name: Rubidium hydroxide, solution
DOT Class: 8
Placard type: Corrosive
ERG Guide: 154 (check current ERG)
Initial isolation: ERG 154: isolate spill 25-50m all directions; for large spills isolate 150m and evacuate 800m downwind

Common Hazards of UN 2677

  • TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury
  • Contact with molten substance may cause severe burns to skin and eyes.
  • Avoid any skin contact.
  • Fire may produce irritating, corrosive and/or toxic gases.
  • Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental
  • Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive
  • Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.).
  • Corrosives in contact with metals may evolve flammable hydrogen gas.

Chemical Identity & Physical Properties

Also known asRubidium hydroxide solutionRubidium hydrate solutionCaustic rubidium solutionRbOH solution
CAS Number1310-82-3
AppearanceClear to slightly yellowish aqueous solution of rubidium hydroxide. Strong alkaline odor. Highly corrosive liquid at room temperature.
Flash PointNot applicable (aqueous solution, non-flammable)
Boiling PointApproximately 100C (212F) for dilute solutions, higher for concentrated solutions
Vapor DensityNot applicable (aqueous solution)
Water ReactivityAlready in aqueous solution; generates heat when dissolved but solution itself is stable
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 2677

Extinguishing Media

Do not use water jet; dry chemical, soda ash, or lime for spills; avoid contact with acids

PPE Requirements

⚠️ Level B minimum; full face shield, chemical-resistant suit, butyl rubber gloves; SCBA for confined spaces or large spills

Isolation & Evacuation

ERG 154: isolate spill 25-50m all directions; for large spills isolate 150m and evacuate 800m downwind
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 154).

First Actions for a UN 2677 Incident

  • CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
  • Keep unauthorized personnel away.
  • Stay upwind, uphill and/or upstream.
  • Ventilate closed spaces before entering, but only if properly trained and equipped.
  • Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters
  • For highlighted materials: see Table 1 - Initial Isolation and Protective Action Distances.
  • For non-highlighted materials: increase the immediate precautionary measure distance, in the downwind
Advertisement

📋 Copy & Share Field Card

UN 2677 — Rubidium hydroxide, solution
HAZMAT RADIO NOTE — UN 2677 Product: Rubidium hydroxide, solution Class 8 / Corrosive / ERG 154 PPE: Level B minimum; full face shield, chemical-resistant suit, butyl rubber gloves; SCBA for confined spaces or large spills ISOLATION: ERG 154: isolate spill 25-50m all directions; for large spills isolate 150m and evacuate 800m downwind ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 2677 — Rubidium hydroxide, solution Class: 8 | Placard: Corrosive | ERG Guide: 154 Appearance: Clear to slightly yellowish aqueous solution of rubidium hydroxide. Strong alkaline odor. Highly corrosive liquid at room temperature. Water Reactivity: Already in aqueous solution; generates heat when dissolved but solution itself is stable Extinguishing: Do not use water jet; dry chemical, soda ash, or lime for spills; avoid contact with acids PPE: Level B minimum; full face shield, chemical-resistant suit, butyl rubber gloves; SCBA for confined spaces or large spills Isolation: ERG 154: isolate spill 25-50m all directions; for large spills isolate 150m and evacuate 800m downwind — Key Hazards — • TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury • Contact with molten substance may cause severe burns to skin and eyes. • Avoid any skin contact. — First Actions — • CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper • Keep unauthorized personnel away. • Stay upwind, uphill and/or upstream. • Ventilate closed spaces before entering, but only if properly trained and equipped. SOURCE: allfirefighter.com/hazmat/un/2677 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief. Full chemical + response details.

SMS (short)
UN2677 Rubidium hydroxide, solution Cls8 ERG154 | allfirefighter.com/hazmat/un/2677SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS. Includes link to full page.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/2677

Related UN Numbers in Class 8

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 2677

TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Corrosives in contact with metals may evolve flammable hydrogen gas.

CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper Keep unauthorized personnel away. Stay upwind, uphill and/or upstream.

Level B minimum; full face shield, chemical-resistant suit, butyl rubber gloves; SCBA for confined spaces or large spills

Water reactivity: Already in aqueous solution; generates heat when dissolved but solution itself is stable. Recommended extinguishing: Do not use water jet; dry chemical, soda ash, or lime for spills; avoid contact with acids.

ERG Guide 154 recommendation: ERG 154: isolate spill 25-50m all directions; for large spills isolate 150m and evacuate 800m downwind

No. This is a training/quick-reference aid only. Always consult the current ERG Guide 154 and your department SOP/SOG for incident-specific protective actions.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.