☣️ UN 3301 • CLASS 8
UN 3301 — Corrosive liquid, self-heating, n.o.s.
Placard: Corrosive. ERG Guide 136. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.
🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.
Advertisement
UN 3301 Quick Details
UN 3301
Product name: Corrosive liquid, self-heating, n.o.s.
DOT Class: 8
Placard type: Corrosive
ERG Guide: 136 (check current ERG)
Initial isolation: ERG 136: isolate spill area at least 25-50m in all directions; if fire or large spill, isolate 800m and evacuate downwind
Common Hazards of UN 3301
- Extremely flammable; will ignite itself if exposed to air.
- Burns rapidly, releasing dense, white, irritating fumes.
- Substance may be transported in a molten form.
- May re-ignite after fire is extinguished.
- Corrosives in contact with metals may evolve flammable hydrogen gas.
- Containers may explode when heated.
- Fire will produce irritating, corrosive and/or toxic gases.
- TOXIC and/or CORROSIVE; ingestion of substance or inhalation of decomposition products will cause
Chemical Identity & Physical Properties
| Also known as | Corrosive liquid, self-heating, not otherwise specifiedSelf-heating corrosive liquidUN3301 |
| Appearance | Appearance varies depending on specific substance; typically a corrosive liquid that may be transported in molten form. Self-heating properties mean it can spontaneously ignite when exposed to air. |
| Flash Point | Not applicable (self-heating material) |
| Boiling Point | Variable depending on specific substance |
| Vapor Density | Variable depending on specific substance, typically heavier than air |
| Water Reactivity | May react with water generating heat and corrosive fumes; avoid water contact |
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.
Fireground Response Guidance — UN 3301
Extinguishing Media
Dry chemical, CO2, sand; do not use water or foam due to corrosive nature and self-heating properties
PPE Requirements
⚠️ Level A or B with SCBA required; full chemical-resistant suit; avoid all contact due to corrosive and self-heating hazards
Isolation & Evacuation
ERG 136: isolate spill area at least 25-50m in all directions; if fire or large spill, isolate 800m and evacuate downwind
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 136).
First Actions for a UN 3301 Incident
- CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
- Stay upwind, uphill and/or upstream.
- Keep unauthorized personnel away.
- Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters
- For highlighted materials: see Table 1 - Initial Isolation and Protective Action Distances.
- For non-highlighted materials: increase the immediate precautionary measure distance, in the downwind
Advertisement
📋 Copy & Share Field Card
UN 3301 — Corrosive liquid, self-heating, n.o.s.HAZMAT RADIO NOTE — UN 3301
Product: Corrosive liquid, self-heating, n.o.s.
Class 8 / Corrosive / ERG 136
PPE: Level A or B with SCBA required; full chemical-resistant suit; avoid all contact due to corrosive and self-heating hazards
ISOLATION: ERG 136: isolate spill area at least 25-50m in all directions; if fire or large spill, isolate 800m and evacuate downwind
ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO
Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.
=== IC HAZMAT BRIEFING ===
UN 3301 — Corrosive liquid, self-heating, n.o.s.
Class: 8 | Placard: Corrosive | ERG Guide: 136
Appearance: Appearance varies depending on specific substance; typically a corrosive liquid that may be transported in molten form. Self-heating properties mean it can spontaneously ignite when exposed to air.
Water Reactivity: May react with water generating heat and corrosive fumes; avoid water contact
Extinguishing: Dry chemical, CO2, sand; do not use water or foam due to corrosive nature and self-heating properties
PPE: Level A or B with SCBA required; full chemical-resistant suit; avoid all contact due to corrosive and self-heating hazards
Isolation: ERG 136: isolate spill area at least 25-50m in all directions; if fire or large spill, isolate 800m and evacuate downwind
— Key Hazards —
• Extremely flammable; will ignite itself if exposed to air.
• Burns rapidly, releasing dense, white, irritating fumes.
• Substance may be transported in a molten form.
— First Actions —
• CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
• Stay upwind, uphill and/or upstream.
• Keep unauthorized personnel away.
• Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters
SOURCE: allfirefighter.com/hazmat/un/3301 | Always use current ERG + SOP/SOGIC BRIEFING
Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief. Full chemical + response details.
UN3301 Corrosive liquid, self-heating, n.o.s. Cls8 ERG136 | allfirefighter.com/hazmat/un/3301SMS / 160 CHAR
Use for: Quick text to command or incoming units. Fits in a single SMS. Includes link to full page.
⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions.
Page: https://allfirefighter.com/hazmat/un/3301
Advertisement
Frequently Asked Questions about UN 3301
Extremely flammable; will ignite itself if exposed to air. Burns rapidly, releasing dense, white, irritating fumes. Substance may be transported in a molten form. May re-ignite after fire is extinguished. Corrosives in contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Fire will produce irritating, corrosive and/or toxic gases. TOXIC and/or CORROSIVE; ingestion of substance or inhalation of decomposition products will cause
CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper Stay upwind, uphill and/or upstream. Keep unauthorized personnel away.
Level A or B with SCBA required; full chemical-resistant suit; avoid all contact due to corrosive and self-heating hazards
Water reactivity: May react with water generating heat and corrosive fumes; avoid water contact. Recommended extinguishing: Dry chemical, CO2, sand; do not use water or foam due to corrosive nature and self-heating properties.
ERG Guide 136 recommendation: ERG 136: isolate spill area at least 25-50m in all directions; if fire or large spill, isolate 800m and evacuate downwind
No. This is a training/quick-reference aid only. Always consult the current ERG Guide 136 and your department SOP/SOG for incident-specific protective actions.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles.
This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.