☣️ UN 2619 • CLASS 8

UN 2619 — Benzyldimethylamine

Placard: Corrosive. ERG Guide 132. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 2619 is Benzyldimethylamine, a flammable corrosive amine assigned to ERG Guide 132. Vapor flashback, alkaline burns and runoff are key concerns.

Hazard overview: FLAMMABLE and CORROSIVE amine liquid; vapors may ignite and form explosive mixtures with air. Liquid and vapor can burn eyes, skin and respiratory tissue. Vapors are heavier than air and may travel to ignition sources and flash back.

Response guidance: For UN 2619, isolate the area, eliminate ignition sources when flammable vapors are present and use SCBA. Keep vapors out of drains, cool containers from protection and select foam/dry chemical/CO2 from SDS and ERG 132.

Firefighter training notes: Training for UN 2619 should emphasize vapor travel, sewer flashback, foam selection, ignition control, SCBA use, decontamination, container cooling and runoff containment. Use ERG 132, SDS and local SOP.

Regulatory context: Benzyldimethylamine is regulated as a hazardous material for transport and emergency response. Storage, exposure, spill reporting, waste and fire-code duties depend on quantity, concentration and jurisdiction; verify shipping papers, SDS and local authority requirements.

Storage & handling: Benzyldimethylamine should be stored in approved compatible containers with ventilation, secondary containment and separation from heat, ignition sources, oxidizers and incompatible materials according to SDS.

Advertisement

UN 2619 Quick Details

UN 2619
Product name: Benzyldimethylamine
DOT Class: 8
Placard type: Corrosive
ERG Guide: 132 (check current ERG)
Initial isolation: ERG 132: Isolate spill area at least 25m in all directions; for large spills consider evacuation 100m downwind

Common Hazards of UN 2619

  • FLAMMABLE and CORROSIVE amine liquid; vapors may ignite and form explosive mixtures with air.
  • Liquid and vapor can burn eyes, skin and respiratory tissue.
  • Vapors are heavier than air and may travel to ignition sources and flash back.
  • Mixing with water may generate heat and spread alkaline/corrosive contamination.
  • Runoff to sewers may create fire, explosion and corrosive contamination hazards.
  • Fire may produce nitrogen oxides and irritating/toxic smoke.
  • Containers may rupture or explode when heated.

Chemical Identity & Physical Properties

Clear to pale yellow liquid with a fishy, amine-like odor. Oily consistency at room temperature.

Also known asN,N-DimethylbenzylamineBDMAN-BenzyldimethylamineDimethylbenzylamineBenzyl-N,N-dimethylamine
CAS Number103-83-3
AppearanceClear to pale yellow liquid with a fishy, amine-like odor. Oily consistency at room temperature.
Flash Point59°C (138°F)
Boiling Point180-183°C (356-361°F)
Vapor Density4.7 (heavier than air)
Water ReactivitySlightly soluble in water; no violent reaction but may generate heat upon mixing.
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 2619

Extinguishing Media

Use alcohol-resistant foam or AFFF where suitable, dry chemical or CO2. Water spray may cool containers from a protected position; contain contaminated runoff.

PPE Requirements

⚠️ Level B minimum with SCBA; chemical-resistant gloves and suit required due to corrosive nature

Use positive-pressure SCBA for vapor, fire or confined-space exposure. Wear chemical-resistant gloves, boots, eye/face protection and protective clothing.

Isolation & Evacuation

ERG 132: Isolate spill area at least 25m in all directions; for large spills consider evacuation 100m downwind
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 132).

First Actions for a UN 2619 Incident

  • Call 911 and the emergency response number on the shipping paper, if available.
  • Keep unauthorized personnel away and establish incident command.
  • Stay upwind, uphill and upstream.
  • Eliminate ignition sources if this can be done safely.
  • Avoid breathing vapor, dust, gas, mist, smoke or fumes and avoid skin or eye contact.
  • Do not touch damaged containers or spilled material without proper training and PPE.
  • Ventilate confined spaces only after monitoring and only if properly trained and equipped.
  • Use ERG Guide 132, SDS, shipping papers and monitoring to set isolation, evacuation and entry decisions.
Advertisement

📋 Copy & Share Field Card

UN 2619 — Benzyldimethylamine
HAZMAT RADIO NOTE — UN 2619 Product: Benzyldimethylamine Class 8 / Corrosive / ERG 132 PPE: Level B minimum with SCBA; chemical-resistant gloves and suit required due to corrosive nature ISOLATION: ERG 132: Isolate spill area at least 25m in all directions; for large spills consider evacuation 100m downwind ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 2619 — Benzyldimethylamine Class: 8 | Placard: Corrosive | ERG Guide: 132 Appearance: Clear to pale yellow liquid with a fishy, amine-like odor. Oily consistency at room temperature. Water Reactivity: Slightly soluble in water; no violent reaction but may generate heat upon mixing. Extinguishing: Use alcohol-resistant foam or AFFF where suitable, dry chemical or CO2. Water spray may cool containers from a protected position; contain contaminated runoff. PPE: Level B minimum with SCBA; chemical-resistant gloves and suit required due to corrosive nature Isolation: ERG 132: Isolate spill area at least 25m in all directions; for large spills consider evacuation 100m downwind — Key Hazards — • FLAMMABLE and CORROSIVE amine liquid; vapors may ignite and form explosive mixtures with air. • Liquid and vapor can burn eyes, skin and respiratory tissue. • Vapors are heavier than air and may travel to ignition sources and flash back. — First Actions — • Call 911 and the emergency response number on the shipping paper, if available. • Keep unauthorized personnel away and establish incident command. • Stay upwind, uphill and upstream. • Eliminate ignition sources if this can be done safely. SOURCE: allfirefighter.com/hazmat/un/benzyldimethylamine-un-2619 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN2619 Benzyldimethylamine Cls8 ERG132 | allfirefighter.com/hazmat/un/benzyldimethylamine-un-2619SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/benzyldimethylamine-un-2619

Related UN Numbers in Class 8

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 2619

UN 2619 is Benzyldimethylamine, assigned to ERG Guide 132.

Yes. Benzyldimethylamine is flammable and its vapors may form explosive mixtures with air.

FLAMMABLE and CORROSIVE amine liquid; vapors may ignite and form explosive mixtures with air. Liquid and vapor can burn eyes, skin and respiratory tissue. Vapors are heavier than air and may travel to ignition sources and flash back.

Use positive-pressure SCBA for vapor, fire or confined-space exposure. Wear chemical-resistant gloves, boots, eye/face protection and protective clothing.

Use alcohol-resistant foam or AFFF where suitable, dry chemical or CO2. Water spray may cool containers from a protected position; contain contaminated runoff.

Heavy flammable vapors can move through drains or sewers and ignite remotely, causing flashback or vapor explosion.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.