☣️ UN 1788 • CLASS 8

UN 1788 — Hydrobromic acid

Placard: Corrosive. ERG Guide 154. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 1788 is Hydrobromic acid, a Class 8 corrosive acid assigned to ERG Guide 154. It can release irritating acid fumes and cause severe burns to eyes, skin and respiratory tissue.

Hazard overview: UN 1788 presents corrosive liquid, acid fume, heat-on-dilution and acidic-runoff hazards. Contact with some metals may release flammable hydrogen gas, and vapors can accumulate in poorly ventilated areas.

Response guidance: For a UN 1788 incident, responders should verify the product with shipping papers, package markings, SDS and ERG Guide 154. Establish incident command, isolate the area, stay upwind, prevent incompatible contact, control runoff and choose entry or fire-control actions based on monitoring, SDS and local SOP.

Firefighter training notes: Training for UN 1788 should emphasize corrosive exposure routes, water or oxidizer incompatibility where applicable, air monitoring, PPE selection, decontamination and runoff containment. Use ERG 154, SDS and local SOP.

Regulatory context: Hydrobromic acid is regulated as a hazardous material for transportation and emergency response purposes. Transportation, workplace exposure, spill reporting, waste handling, storage and environmental requirements may vary by concentration, formulation, quantity and jurisdiction. Verify current requirements through shipping papers, SDS, facility documents and applicable DOT, OSHA, EPA, NFPA, state or local authority guidance.

Storage & handling: Hydrobromic acid should be stored in tightly closed compatible containers in a secure, cool, dry, well-ventilated hazardous-material area according to SDS and local procedures.

Advertisement

UN 1788 Quick Details

UN 1788
Product name: Hydrobromic acid
DOT Class: 8
Placard type: Corrosive
ERG Guide: 154 (check current ERG)
Initial isolation: ERG 154: isolate spill 50m all directions; evacuate 800m downwind if large spill; protect from physical damage

Common Hazards of UN 1788

  • CORROSIVE acid solution; inhalation, ingestion or skin/eye contact may cause severe injury.
  • Fumes may contain hydrogen bromide and can injure eyes and respiratory tissue.
  • Dilution with water may generate heat and increase fuming.
  • Contact with some metals may release flammable hydrogen gas.
  • Fire may produce irritating, corrosive and/or toxic gases.
  • Runoff may be strongly acidic and corrosive.
  • Vapors may collect in poorly ventilated or low areas depending on concentration and conditions.

Chemical Identity & Physical Properties

Colorless to light yellow fuming liquid with a pungent, irritating odor. Aqueous solution of hydrogen bromide gas, typically 47-49% concentration.

Also known asHydrogen bromide solutionHBr solutionBromhydric acidHydrobromic acid solution
CAS Number10035-10-6
AppearanceColorless to light yellow fuming liquid with a pungent, irritating odor. Aqueous solution of hydrogen bromide gas, typically 47-49% concentration.
Flash PointNot applicable (non-flammable aqueous solution)
Boiling Point126C (259F) for azeotropic mixture (47.6% HBr)
Vapor DensityNot applicable (aqueous solution)
Water ReactivityMiscible with water; generates heat upon dilution. Already an aqueous solution.
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 1788

Extinguishing Media

Use water spray from a protected position to reduce vapors and cool containers when appropriate. Avoid high-pressure streams that spread corrosive acid, and contain runoff.

PPE Requirements

⚠️ Level B minimum with SCBA; acid-resistant suit, gloves, and boots; face shield; avoid all contact with liquid and vapors

Use positive-pressure SCBA for vapor, mist, fire or confined-space exposure. Wear chemical-resistant gloves, boots, eye/face protection and protective clothing selected from SDS for corrosive liquid contact.

Isolation & Evacuation

ERG 154: isolate spill 50m all directions; evacuate 800m downwind if large spill; protect from physical damage
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 154).

First Actions for a UN 1788 Incident

  • CALL 911. Then call the emergency response telephone number on the shipping paper, if available.
  • Keep unauthorized personnel away.
  • Stay upwind, uphill and/or upstream.
  • Avoid breathing vapors, fumes, dust, mist or spray and avoid skin or eye contact.
  • Do not touch or walk through spilled material unless properly trained and wearing appropriate protective equipment.
  • Ventilate closed spaces before entering, but only if properly trained, equipped, monitored and authorized by incident command.
  • Isolate the spill or leak area and expand the perimeter if vapor, dust, fire involvement, water reaction or unknown concentration is present.
  • Use ERG Guide 154, shipping papers, SDS, air monitoring and incident command for protective actions.
Advertisement

📋 Copy & Share Field Card

UN 1788 — Hydrobromic acid
HAZMAT RADIO NOTE — UN 1788 Product: Hydrobromic acid Class 8 / Corrosive / ERG 154 PPE: Level B minimum with SCBA; acid-resistant suit, gloves, and boots; face shield; avoid all contact with liquid and vapors ISOLATION: ERG 154: isolate spill 50m all directions; evacuate 800m downwind if large spill; protect from physical damage ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 1788 — Hydrobromic acid Class: 8 | Placard: Corrosive | ERG Guide: 154 Appearance: Colorless to light yellow fuming liquid with a pungent, irritating odor. Aqueous solution of hydrogen bromide gas, typically 47-49% concentration. Water Reactivity: Miscible with water; generates heat upon dilution. Already an aqueous solution. Extinguishing: Use water spray from a protected position to reduce vapors and cool containers when appropriate. Avoid high-pressure streams that spread corrosive acid, and contain runoff. PPE: Level B minimum with SCBA; acid-resistant suit, gloves, and boots; face shield; avoid all contact with liquid and vapors Isolation: ERG 154: isolate spill 50m all directions; evacuate 800m downwind if large spill; protect from physical damage — Key Hazards — • CORROSIVE acid solution; inhalation, ingestion or skin/eye contact may cause severe injury. • Fumes may contain hydrogen bromide and can injure eyes and respiratory tissue. • Dilution with water may generate heat and increase fuming. — First Actions — • CALL 911. Then call the emergency response telephone number on the shipping paper, if available. • Keep unauthorized personnel away. • Stay upwind, uphill and/or upstream. • Avoid breathing vapors, fumes, dust, mist or spray and avoid skin or eye contact. SOURCE: allfirefighter.com/hazmat/un/hydrobromic-acid-un-1788 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN1788 Hydrobromic acid Cls8 ERG154 | allfirefighter.com/hazmat/un/hydrobromic-acid-un-1788SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/hydrobromic-acid-un-1788

Related UN Numbers in Class 8

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 1788

UN 1788 is Hydrobromic acid, a hazardous material assigned to ERG Guide 154.

No. It is not flammable, but contact with some metals may release flammable hydrogen gas.

ERG Guide 154 applies to UN 1788 for initial isolation, protective actions and first response guidance.

UN 1788 presents corrosive liquid, acid fume, heat-on-dilution and acidic-runoff hazards. Contact with some metals may release flammable hydrogen gas, and vapors can accumulate in poorly ventilated areas.

Use positive-pressure SCBA for vapor, mist, fire or confined-space exposure. Wear chemical-resistant gloves, boots, eye/face protection and protective clothing selected from SDS for corrosive liquid contact.

Yes. Corrosive acids may react with some metals and release flammable hydrogen gas; verify compatibility from SDS.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.