☣️ UN 1793 • CLASS 8

UN 1793 — Isopropyl acid phosphate

Placard: Corrosive. ERG Guide 153. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 1793 is Isopropyl acid phosphate, a corrosive combustible phosphate liquid assigned to ERG Guide 153. It can injure skin, eyes and respiratory tissue and may burn under fire conditions.

Hazard overview: UN 1793 presents corrosive liquid, combustible fire and contaminated-runoff hazards. Water dilution may generate heat and spread corrosive contamination.

Response guidance: For a UN 1793 incident, responders should verify the product with shipping papers, package markings, SDS and ERG Guide 153. Establish incident command, isolate the area, stay upwind, prevent incompatible contact, control runoff and choose entry or fire-control actions based on monitoring, SDS and local SOP.

Firefighter training notes: Training for UN 1793 should emphasize corrosive exposure routes, water or oxidizer incompatibility where applicable, air monitoring, PPE selection, decontamination and runoff containment. Use ERG 153, SDS and local SOP.

Regulatory context: Isopropyl acid phosphate is regulated as a hazardous material for transportation and emergency response purposes. Transportation, workplace exposure, spill reporting, waste handling, storage and environmental requirements may vary by concentration, formulation, quantity and jurisdiction. Verify current requirements through shipping papers, SDS, facility documents and applicable DOT, OSHA, EPA, NFPA, state or local authority guidance.

Storage & handling: Isopropyl acid phosphate should be stored in tightly closed compatible containers in a secure, cool, dry, well-ventilated hazardous-material area according to SDS and local procedures.

Advertisement

UN 1793 Quick Details

UN 1793
Product name: Isopropyl acid phosphate
DOT Class: 8
Placard type: Corrosive
ERG Guide: 153 (check current ERG)
Initial isolation: ERG 153: isolate spill 25-50m all directions; for large spill consider initial evacuation 100m downwind

Common Hazards of UN 1793

  • CORROSIVE combustible phosphate liquid; inhalation, ingestion or skin contact may cause severe injury.
  • Liquid can burn eyes, skin and respiratory tissue.
  • Combustible material: may burn but does not ignite readily.
  • Water dilution may generate heat and spread corrosive runoff.
  • Fire may produce phosphorus oxides and other irritating/corrosive gases.
  • Containers may rupture or fail when heated.
  • Runoff may be corrosive and environmentally harmful.

Chemical Identity & Physical Properties

Colorless to pale yellow liquid with a characteristic acidic odor. Corrosive liquid at room temperature.

Also known asPhosphoric acid, isopropyl esterMonoisopropyl phosphateIsopropyl dihydrogen phosphateIPA phosphate
CAS Number1623-24-1
AppearanceColorless to pale yellow liquid with a characteristic acidic odor. Corrosive liquid at room temperature.
Flash PointNot readily flammable, >100C (>212F)
Boiling PointDecomposes before boiling, approximately 200-250C (392-482F)
Vapor DensityHeavier than air (vapor density >1)
Water ReactivitySoluble in water, may generate heat. Acidic solution formed.
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 1793

Extinguishing Media

Use extinguishing agents appropriate for the surrounding fire and SDS. Water spray may cool containers or reduce vapors only when runoff can be controlled as corrosive/toxic contamination.

PPE Requirements

⚠️ Level B minimum; SCBA required; full face shield; acid-resistant gloves and suit

Use positive-pressure SCBA for vapor, mist, fire or confined-space exposure. Wear chemical-resistant gloves, boots, eye/face protection and protective clothing selected from SDS for corrosive liquid contact.

Isolation & Evacuation

ERG 153: isolate spill 25-50m all directions; for large spill consider initial evacuation 100m downwind
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 153).

First Actions for a UN 1793 Incident

  • CALL 911. Then call the emergency response telephone number on the shipping paper, if available.
  • Keep unauthorized personnel away.
  • Stay upwind, uphill and/or upstream.
  • Avoid breathing vapors, fumes, dust, mist or spray and avoid skin or eye contact.
  • Do not touch or walk through spilled material unless properly trained and wearing appropriate protective equipment.
  • Ventilate closed spaces before entering, but only if properly trained, equipped, monitored and authorized by incident command.
  • Isolate the spill or leak area and expand the perimeter if vapor, dust, fire involvement, water reaction or unknown concentration is present.
  • Use ERG Guide 153, shipping papers, SDS, air monitoring and incident command for protective actions.
Advertisement

📋 Copy & Share Field Card

UN 1793 — Isopropyl acid phosphate
HAZMAT RADIO NOTE — UN 1793 Product: Isopropyl acid phosphate Class 8 / Corrosive / ERG 153 PPE: Level B minimum; SCBA required; full face shield; acid-resistant gloves and suit ISOLATION: ERG 153: isolate spill 25-50m all directions; for large spill consider initial evacuation 100m downwind ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 1793 — Isopropyl acid phosphate Class: 8 | Placard: Corrosive | ERG Guide: 153 Appearance: Colorless to pale yellow liquid with a characteristic acidic odor. Corrosive liquid at room temperature. Water Reactivity: Soluble in water, may generate heat. Acidic solution formed. Extinguishing: Use extinguishing agents appropriate for the surrounding fire and SDS. Water spray may cool containers or reduce vapors only when runoff can be controlled as corrosive/toxic contamination. PPE: Level B minimum; SCBA required; full face shield; acid-resistant gloves and suit Isolation: ERG 153: isolate spill 25-50m all directions; for large spill consider initial evacuation 100m downwind — Key Hazards — • CORROSIVE combustible phosphate liquid; inhalation, ingestion or skin contact may cause severe injury. • Liquid can burn eyes, skin and respiratory tissue. • Combustible material: may burn but does not ignite readily. — First Actions — • CALL 911. Then call the emergency response telephone number on the shipping paper, if available. • Keep unauthorized personnel away. • Stay upwind, uphill and/or upstream. • Avoid breathing vapors, fumes, dust, mist or spray and avoid skin or eye contact. SOURCE: allfirefighter.com/hazmat/un/isopropyl-acid-phosphate-un-1793 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN1793 Isopropyl acid phosphate Cls8 ERG153 | allfirefighter.com/hazmat/un/isopropyl-acid-phosphate-un-1793SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/isopropyl-acid-phosphate-un-1793

Related UN Numbers in Class 8

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 1793

UN 1793 is Isopropyl acid phosphate, a hazardous material assigned to ERG Guide 153.

It is combustible but does not ignite readily; corrosive exposure is the main responder concern.

ERG Guide 153 applies to UN 1793 for initial isolation, protective actions and first response guidance.

UN 1793 presents corrosive liquid, combustible fire and contaminated-runoff hazards. Water dilution may generate heat and spread corrosive contamination.

Use positive-pressure SCBA for vapor, mist, fire or confined-space exposure. Wear chemical-resistant gloves, boots, eye/face protection and protective clothing selected from SDS for corrosive liquid contact.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.