☣️ UN 2442 • CLASS 8

UN 2442 — Trichloroacetyl chloride

Placard: Corrosive. ERG Guide 156. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 2442 is Trichloroacetyl chloride, a toxic corrosive acid chloride assigned to ERG Guide 156. Water or moist air can release hydrogen chloride fumes and heat.

Hazard overview: TOXIC and CORROSIVE acid chloride; inhalation or skin contact may cause severe injury. Reacts with water or moist air, releasing hydrogen chloride fumes and heat. Combustible or flammable behavior depends on the specific acid chloride.

Response guidance: For UN 2442, isolate the spill, stay upwind and use SCBA with chemical protection. Control moisture contact, contain acidic runoff and use dry compatible agents under SDS and ERG 156 guidance.

Firefighter training notes: Training for UN 2442 should emphasize water-reactive corrosive fuming, HCl hazards, dry-agent selection, Level A/B decisions, decontamination and acidic runoff control. Use ERG 156, SDS and local SOP.

Regulatory context: Trichloroacetyl chloride is regulated as a hazardous material for transport and emergency response. Storage, exposure, spill reporting, waste and fire-code duties depend on quantity, concentration and jurisdiction; verify shipping papers, SDS and local authority requirements.

Storage & handling: Trichloroacetyl chloride should be stored dry in tightly closed compatible containers away from water, moisture, bases, oxidizers/reducing agents where incompatible, heat and unauthorized access. Provide secondary containment.

Advertisement

UN 2442 Quick Details

UN 2442
Product name: Trichloroacetyl chloride
DOT Class: 8
Placard type: Corrosive
ERG Guide: 156 (check current ERG)
Initial isolation: ERG 156: isolate spill 25m all directions; for large spills isolate 50m and evacuate 300m downwind initially

Common Hazards of UN 2442

  • TOXIC and CORROSIVE acid chloride; inhalation or skin contact may cause severe injury.
  • Reacts with water or moist air, releasing hydrogen chloride fumes and heat.
  • Combustible or flammable behavior depends on the specific acid chloride.
  • Vapors may collect in low or confined areas and irritate eyes, skin and respiratory tissue.
  • Fire may produce hydrogen chloride, phosgene-type gases and other toxic/corrosive smoke.
  • Runoff may be acidic, corrosive and toxic.
  • Containers may rupture when heated or contaminated with water.

Chemical Identity & Physical Properties

Colorless to pale yellow liquid with a pungent, acrid odor. Fuming in moist air due to reaction with atmospheric moisture.

Also known asTrichloroacetyl chlorideTrichloroethanoyl chlorideAcetyl trichlorideTCAC
CAS Number76-02-8
AppearanceColorless to pale yellow liquid with a pungent, acrid odor. Fuming in moist air due to reaction with atmospheric moisture.
Flash PointNot readily flammable (combustible but difficult to ignite)
Boiling Point118C (244F)
Vapor Density7.0 (much heavier than air)
Water ReactivityReacts violently with water releasing HCl (hydrochloric acid) and trichloroacetic acid; highly corrosive and toxic fumes produced
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 2442

Extinguishing Media

Use dry chemical, CO2, dry sand or SDS-approved media. Water spray may cool exposed containers from a protected distance, but direct water can increase corrosive fuming.

PPE Requirements

⚠️ Level B minimum with full-face SCBA; chemical-resistant suit required due to severe corrosive properties and toxic vapor release

Use positive-pressure SCBA and chemical-resistant protective clothing. Level A may be needed for heavy vapor, fuming, splash risk or unknown concentrations.

Isolation & Evacuation

ERG 156: isolate spill 25m all directions; for large spills isolate 50m and evacuate 300m downwind initially
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 156).

First Actions for a UN 2442 Incident

  • Call 911 and the emergency response number on the shipping paper, if available.
  • Keep unauthorized personnel away and establish incident command.
  • Stay upwind, uphill and upstream.
  • Avoid breathing vapor, dust, mist, smoke or fumes and avoid skin or eye contact.
  • Keep water contact controlled because moisture can increase heat release, corrosive fuming or ignition.
  • Do not touch damaged containers or spilled material without proper training and PPE.
  • Ventilate confined spaces only after monitoring and only if properly trained and equipped.
  • Use ERG Guide 156, SDS, shipping papers and monitoring to set isolation, evacuation and entry decisions.
Advertisement

📋 Copy & Share Field Card

UN 2442 — Trichloroacetyl chloride
HAZMAT RADIO NOTE — UN 2442 Product: Trichloroacetyl chloride Class 8 / Corrosive / ERG 156 PPE: Level B minimum with full-face SCBA; chemical-resistant suit required due to severe corrosive properties and toxic vapor release ISOLATION: ERG 156: isolate spill 25m all directions; for large spills isolate 50m and evacuate 300m downwind initially ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 2442 — Trichloroacetyl chloride Class: 8 | Placard: Corrosive | ERG Guide: 156 Appearance: Colorless to pale yellow liquid with a pungent, acrid odor. Fuming in moist air due to reaction with atmospheric moisture. Water Reactivity: Reacts violently with water releasing HCl (hydrochloric acid) and trichloroacetic acid; highly corrosive and toxic fumes produced Extinguishing: Use dry chemical, CO2, dry sand or SDS-approved media. Water spray may cool exposed containers from a protected distance, but direct water can increase corrosive fuming. PPE: Level B minimum with full-face SCBA; chemical-resistant suit required due to severe corrosive properties and toxic vapor release Isolation: ERG 156: isolate spill 25m all directions; for large spills isolate 50m and evacuate 300m downwind initially — Key Hazards — • TOXIC and CORROSIVE acid chloride; inhalation or skin contact may cause severe injury. • Reacts with water or moist air, releasing hydrogen chloride fumes and heat. • Combustible or flammable behavior depends on the specific acid chloride. — First Actions — • Call 911 and the emergency response number on the shipping paper, if available. • Keep unauthorized personnel away and establish incident command. • Stay upwind, uphill and upstream. • Avoid breathing vapor, dust, mist, smoke or fumes and avoid skin or eye contact. SOURCE: allfirefighter.com/hazmat/un/trichloroacetyl-chloride-un-2442 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN2442 Trichloroacetyl chloride Cls8 ERG156 | allfirefighter.com/hazmat/un/trichloroacetyl-chloride-un-2442SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/trichloroacetyl-chloride-un-2442

Related UN Numbers in Class 8

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 2442

UN 2442 is Trichloroacetyl chloride, assigned to ERG Guide 156.

It is combustible but does not ignite readily; toxic/corrosive exposure and fire decomposition products are the main hazards.

TOXIC and CORROSIVE acid chloride; inhalation or skin contact may cause severe injury. Reacts with water or moist air, releasing hydrogen chloride fumes and heat. Combustible or flammable behavior depends on the specific acid chloride.

Use positive-pressure SCBA and chemical-resistant protective clothing. Level A may be needed for heavy vapor, fuming, splash risk or unknown concentrations.

Use dry chemical, CO2, dry sand or SDS-approved media. Water spray may cool exposed containers from a protected distance, but direct water can increase corrosive fuming.

Moisture can produce heat, corrosive acidic solution or toxic/corrosive fumes; water use should be controlled by incident command.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.