☣️ UN 1320 • CLASS 4
Dinitrophenol, wetted with not less than 15% water
Placard: Flammable Solid. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.
🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.
Advertisement
Quick details
UN 1320
Class: 4
Placard type: Flammable Solid
ERG: Guide 113 (check current ERG)
Isolation: ERG 113: Isolate spill 50m all directions. If fire or dried material suspected, isolate 800m and evacuate 1600m downwind immediately. Treat any dried material as explosive hazard.
Chemical & Response Details
| Also known as | 2,4-DinitrophenolDNPDinitrophenol wettedSolfo Blackα-Dinitrophenol |
| CAS Number | 25550-58-7 |
| Appearance | Yellow crystalline solid with a sweet, musty odor. Appears as a wetted material with at least 15% water for safe transport. |
| Flash Point | Not applicable (wetted solid) |
| Boiling Point | Decomposes at 108-112C (226-234F) before boiling |
| Vapor Density | Not applicable (solid) |
| Water Reactivity | No significant reaction with water; water used as desensitizer to prevent explosion |
| Extinguishing | Dry chemical, water spray to keep wetted (never allow to dry), CO2 for small fires only |
| PPE | ⚠️ Level B minimum with SCBA; full turnout gear. Highly toxic by skin absorption. Use extreme caution to prevent material from drying out. |
| Isolation | ERG 113: Isolate spill 50m all directions. If fire or dried material suspected, isolate 800m and evacuate 1600m downwind immediately. Treat any dried material as explosive hazard. |
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.
Common hazards (high level)
- Flammable/combustible material.
- May be ignited by heat, sparks or flames.
- DRIED OUT material may explode if exposed to heat, flame, friction or shock; treat as an
- Keep material wet with water or treat as an explosive (GUIDE 112).
- Runoff to sewer may create fire or explosion hazard.
- Some are toxic and may be fatal if inhaled, ingested or absorbed through skin. Specifically,
- Contact may cause burns to skin and eyes.
- Fire may produce irritating, corrosive and/or toxic gases.
First actions (field-minded)
- CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
- Keep unauthorized personnel away.
- Stay upwind, uphill and/or upstream.
- Ventilate closed spaces before entering, but only if properly trained and equipped.
- Isolate spill or leak area immediately for at least 100 meters (330 feet) in all directions.
- Consider initial evacuation for 500 meters (1/3 mile) in all directions.
Advertisement
📋 Copy & Share
UN 1320 — Dinitrophenol, wetted with not less than HAZMAT RADIO NOTE — UN 1320
Product: Dinitrophenol, wetted with not less than 15% water
Class 4 / Flammable Solid / ERG 113
PPE: Level B minimum with SCBA; full turnout gear. Highly toxic by skin absorption. Use extreme caution to prevent material from drying out.
ISOLATION: ERG 113: Isolate spill 50m all directions. If fire or dried material suspected, isolate 800m and evacuate 1600m downwind immediately. Treat any dried material as explosive hazard.
ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO
Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.
=== IC HAZMAT BRIEFING ===
UN 1320 — Dinitrophenol, wetted with not less than 15% water
Class: 4 | Placard: Flammable Solid | ERG Guide: 113
Appearance: Yellow crystalline solid with a sweet, musty odor. Appears as a wetted material with at least 15% water for safe transport.
Water Reactivity: No significant reaction with water; water used as desensitizer to prevent explosion
Extinguishing: Dry chemical, water spray to keep wetted (never allow to dry), CO2 for small fires only
PPE: Level B minimum with SCBA; full turnout gear. Highly toxic by skin absorption. Use extreme caution to prevent material from drying out.
Isolation: ERG 113: Isolate spill 50m all directions. If fire or dried material suspected, isolate 800m and evacuate 1600m downwind immediately. Treat any dried material as explosive hazard.
— Key Hazards —
• Flammable/combustible material.
• May be ignited by heat, sparks or flames.
• DRIED OUT material may explode if exposed to heat, flame, friction or shock; treat as an
— First Actions —
• CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
• Keep unauthorized personnel away.
• Stay upwind, uphill and/or upstream.
• Ventilate closed spaces before entering, but only if properly trained and equipped.
SOURCE: allfirefighter.com/hazmat/un/1320 | Always use current ERG + SOP/SOGIC BRIEFING
Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief. Full chemical + response details.
UN1320 Dinitrophenol, wetted with not less than 15% water Cls4 ERG113 | allfirefighter.com/hazmat/un/1320SMS / 160 CHAR
Use for: Quick text to command or incoming units. Fits in a single SMS. Includes link to full page.
⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/1320
Advertisement
FAQ
Flammable/combustible material. May be ignited by heat, sparks or flames. DRIED OUT material may explode if exposed to heat, flame, friction or shock; treat as an Keep material wet with water or treat as an explosive (GUIDE 112). Runoff to sewer may create fire or explosion hazard. Some are toxic and may be fatal if inhaled, ingested or absorbed through skin. Specifically, Contact may cause burns to skin and eyes. Fire may produce irritating, corrosive and/or toxic gases.
CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper Keep unauthorized personnel away. Stay upwind, uphill and/or upstream.
Level B minimum with SCBA; full turnout gear. Highly toxic by skin absorption. Use extreme caution to prevent material from drying out.
No. This is a training/quick-reference aid only. Always consult the current ERG Guide 113 and your department SOP/SOG for incident-specific protective actions.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.