☣️ UN 1382 • CLASS 4
Potassium sulphide, with less than 30% water of crystallization
Placard: Spontaneously Combustible. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.
🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.
Advertisement
Quick details
UN 1382
Class: 4
Placard type: Spontaneously Combustible
ERG: Guide 135 (check current ERG)
Isolation: ERG 135: isolate 25-50m all directions initially; evacuate downwind areas if fire or leak generates toxic hydrogen sulfide gas
Chemical & Response Details
| Also known as | Potassium sulfideDipotassium sulfidePotassium monosulfideHepar sulfuris |
| CAS Number | 1312-73-8 |
| Appearance | Yellow to red crystalline solid or fused mass with a characteristic sulfide (rotten egg) odor. Hygroscopic and deliquescent. |
| Flash Point | Not applicable (pyrophoric solid, may ignite spontaneously on contact with moist air) |
| Boiling Point | Not applicable (decomposes at high temperature before boiling) |
| Vapor Density | Not applicable (solid) |
| Water Reactivity | Reacts with water to produce heat and hydrogen sulfide (toxic, flammable gas); may ignite spontaneously in moist air |
| Extinguishing | Dry sand, dry chemical, soda ash; no water or foam due to water reactivity |
| PPE | ⚠️ Level B minimum; SCBA required due to hydrogen sulfide generation; chemical-resistant gloves and suit |
| Isolation | ERG 135: isolate 25-50m all directions initially; evacuate downwind areas if fire or leak generates toxic hydrogen sulfide gas |
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.
Common hazards (high level)
- Flammable/combustible material.
- May ignite on contact with moist air or moisture.
- May burn rapidly with flare-burning effect.
- Some react vigorously or explosively on contact with water.
- Some may decompose explosively when heated or involved in a fire.
- May re-ignite after fire is extinguished.
- Runoff may create fire or explosion hazard.
- Containers may explode when heated.
First actions (field-minded)
- CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
- Stay upwind, uphill and/or upstream.
- Keep unauthorized personnel away.
- Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters
- For highlighted materials: see Table 1 - Initial Isolation and Protective Action Distances.
- For non-highlighted materials: increase the immediate precautionary measure distance, in the downwind
Advertisement
📋 Copy & Share
UN 1382 — Potassium sulphide, with less than 30% w HAZMAT RADIO NOTE — UN 1382
Product: Potassium sulphide, with less than 30% water of crystallization
Class 4 / Spontaneously Combustible / ERG 135
PPE: Level B minimum; SCBA required due to hydrogen sulfide generation; chemical-resistant gloves and suit
ISOLATION: ERG 135: isolate 25-50m all directions initially; evacuate downwind areas if fire or leak generates toxic hydrogen sulfide gas
ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO
Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.
=== IC HAZMAT BRIEFING ===
UN 1382 — Potassium sulphide, with less than 30% water of crystallization
Class: 4 | Placard: Spontaneously Combustible | ERG Guide: 135
Appearance: Yellow to red crystalline solid or fused mass with a characteristic sulfide (rotten egg) odor. Hygroscopic and deliquescent.
Water Reactivity: Reacts with water to produce heat and hydrogen sulfide (toxic, flammable gas); may ignite spontaneously in moist air
Extinguishing: Dry sand, dry chemical, soda ash; no water or foam due to water reactivity
PPE: Level B minimum; SCBA required due to hydrogen sulfide generation; chemical-resistant gloves and suit
Isolation: ERG 135: isolate 25-50m all directions initially; evacuate downwind areas if fire or leak generates toxic hydrogen sulfide gas
— Key Hazards —
• Flammable/combustible material.
• May ignite on contact with moist air or moisture.
• May burn rapidly with flare-burning effect.
— First Actions —
• CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
• Stay upwind, uphill and/or upstream.
• Keep unauthorized personnel away.
• Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters
SOURCE: allfirefighter.com/hazmat/un/1382 | Always use current ERG + SOP/SOGIC BRIEFING
Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief. Full chemical + response details.
UN1382 Potassium sulphide, with less than 30% water of crystallization Cls4 ERG135 | allfirefighter.com/hazmat/un/1382SMS / 160 CHAR
Use for: Quick text to command or incoming units. Fits in a single SMS. Includes link to full page.
⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/1382
Advertisement
FAQ
Flammable/combustible material. May ignite on contact with moist air or moisture. May burn rapidly with flare-burning effect. Some react vigorously or explosively on contact with water. Some may decompose explosively when heated or involved in a fire. May re-ignite after fire is extinguished. Runoff may create fire or explosion hazard. Containers may explode when heated.
CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper Stay upwind, uphill and/or upstream. Keep unauthorized personnel away.
Level B minimum; SCBA required due to hydrogen sulfide generation; chemical-resistant gloves and suit
No. This is a training/quick-reference aid only. Always consult the current ERG Guide 135 and your department SOP/SOG for incident-specific protective actions.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.