☣️ UN 1421 • CLASS 4
UN 1421 — Alkali metal alloy, liquid, n.o.s.
Placard: Dangerous When Wet. ERG Guide 138. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.
🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.
Advertisement
UN 1421 Quick Details
UN 1421
Product name: Alkali metal alloy, liquid, n.o.s.
DOT Class: 4
Placard type: Dangerous When Wet
ERG Guide: 138 (check current ERG)
Initial isolation: ERG 138: Isolate spill 50m all directions. If tank/container involved in fire, isolate 800m in all directions and evacuate.
Common Hazards of UN 1421
- Produce flammable gases on contact with water.
- May ignite on contact with water or moist air.
- Some react vigorously or explosively on contact with water.
- May be ignited by heat, sparks or flames.
- May re-ignite after fire is extinguished.
- Some are transported in highly flammable liquids.
- Runoff may create fire or explosion hazard.
- Inhalation or contact with vapors, substance or decomposition products may cause severe injury or
Chemical Identity & Physical Properties
| Also known as | Alkali metal alloy liquidLiquid alkali metal mixtureSodium-potassium alloy (NaK)Alkali metal eutectic alloy |
| Appearance | Silvery-white or gray metallic liquid at room temperature. No characteristic odor. Liquid alloy typically of sodium, potassium, or cesium mixtures. |
| Flash Point | Not applicable (pyrophoric material, ignites spontaneously on contact with air or moisture) |
| Boiling Point | Varies by composition; typically 700-900C (1292-1652F) |
| Vapor Density | Not applicable (liquid metal, negligible vapor pressure at ambient temperature) |
| Water Reactivity | Reacts violently and explosively with water, producing flammable hydrogen gas and heat. May ignite spontaneously. Never use water. |
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.
Fireground Response Guidance — UN 1421
Extinguishing Media
Dry sand, dry salt (NaCl), soda ash, graphite powder. NO water, foam, CO2, or halogenated agents.
PPE Requirements
⚠️ Level A required for spills; full encapsulation, SCBA. Face shield, rubber gloves, and fire-resistant clothing minimum for handling under inert atmosphere.
Isolation & Evacuation
ERG 138: Isolate spill 50m all directions. If tank/container involved in fire, isolate 800m in all directions and evacuate.
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 138).
First Actions for a UN 1421 Incident
- CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
- Keep unauthorized personnel away.
- Stay upwind, uphill and/or upstream.
- Ventilate closed spaces before entering, but only if properly trained and equipped.
- Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters
- Consider initial downwind evacuation for at least 300 meters (1000 feet).
Advertisement
📋 Copy & Share Field Card
UN 1421 — Alkali metal alloy, liquid, n.o.s.HAZMAT RADIO NOTE — UN 1421
Product: Alkali metal alloy, liquid, n.o.s.
Class 4 / Dangerous When Wet / ERG 138
PPE: Level A required for spills; full encapsulation, SCBA. Face shield, rubber gloves, and fire-resistant clothing minimum for handling under inert atmosphere.
ISOLATION: ERG 138: Isolate spill 50m all directions. If tank/container involved in fire, isolate 800m in all directions and evacuate.
ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO
Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.
=== IC HAZMAT BRIEFING ===
UN 1421 — Alkali metal alloy, liquid, n.o.s.
Class: 4 | Placard: Dangerous When Wet | ERG Guide: 138
Appearance: Silvery-white or gray metallic liquid at room temperature. No characteristic odor. Liquid alloy typically of sodium, potassium, or cesium mixtures.
Water Reactivity: Reacts violently and explosively with water, producing flammable hydrogen gas and heat. May ignite spontaneously. Never use water.
Extinguishing: Dry sand, dry salt (NaCl), soda ash, graphite powder. NO water, foam, CO2, or halogenated agents.
PPE: Level A required for spills; full encapsulation, SCBA. Face shield, rubber gloves, and fire-resistant clothing minimum for handling under inert atmosphere.
Isolation: ERG 138: Isolate spill 50m all directions. If tank/container involved in fire, isolate 800m in all directions and evacuate.
— Key Hazards —
• Produce flammable gases on contact with water.
• May ignite on contact with water or moist air.
• Some react vigorously or explosively on contact with water.
— First Actions —
• CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
• Keep unauthorized personnel away.
• Stay upwind, uphill and/or upstream.
• Ventilate closed spaces before entering, but only if properly trained and equipped.
SOURCE: allfirefighter.com/hazmat/un/1421 | Always use current ERG + SOP/SOGIC BRIEFING
Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief. Full chemical + response details.
UN1421 Alkali metal alloy, liquid, n.o.s. Cls4 ERG138 | allfirefighter.com/hazmat/un/1421SMS / 160 CHAR
Use for: Quick text to command or incoming units. Fits in a single SMS. Includes link to full page.
⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions.
Page: https://allfirefighter.com/hazmat/un/1421
Advertisement
Frequently Asked Questions about UN 1421
Produce flammable gases on contact with water. May ignite on contact with water or moist air. Some react vigorously or explosively on contact with water. May be ignited by heat, sparks or flames. May re-ignite after fire is extinguished. Some are transported in highly flammable liquids. Runoff may create fire or explosion hazard. Inhalation or contact with vapors, substance or decomposition products may cause severe injury or
CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper Keep unauthorized personnel away. Stay upwind, uphill and/or upstream.
Level A required for spills; full encapsulation, SCBA. Face shield, rubber gloves, and fire-resistant clothing minimum for handling under inert atmosphere.
Water reactivity: Reacts violently and explosively with water, producing flammable hydrogen gas and heat. May ignite spontaneously. Never use water.. Recommended extinguishing: Dry sand, dry salt (NaCl), soda ash, graphite powder. NO water, foam, CO2, or halogenated agents..
ERG Guide 138 recommendation: ERG 138: Isolate spill 50m all directions. If tank/container involved in fire, isolate 800m in all directions and evacuate.
No. This is a training/quick-reference aid only. Always consult the current ERG Guide 138 and your department SOP/SOG for incident-specific protective actions.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles.
This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.