☣️ UN 1606 • CLASS 6

UN 1606 — Ferric arsenate

Placard: Toxic. ERG Guide 151. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 1606 is Ferric arsenate, a toxic arsenic-containing material assigned to ERG Guide 151. The key responder concern is preventing inhalation of dust or fumes and preventing contaminated runoff.

Hazard overview: UN 1606 presents arsenic dust, fume and ingestion hazards. Heating or fire can create toxic arsenic-containing fumes, and dry powder can contaminate clothing, equipment and surfaces.

Response guidance: For a UN 1606 incident, responders should verify the product with shipping papers, package markings, SDS and ERG Guide 151. Establish incident command, isolate the area, stay upwind, prevent dust or vapor exposure, control runoff and choose entry or cleanup actions based on monitoring, SDS and local SOP.

Firefighter training notes: Training for UN 1606 should emphasize arsenic dust/fume exposure, contamination control, SCBA use, runoff containment and decontamination. Common errors include treating nonflammable toxic solids as low risk and spreading dust during cleanup. Use ERG 151, SDS and local SOP.

Regulatory context: Ferric arsenate is regulated as a toxic arsenic hazardous material. Transportation, workplace exposure, spill reporting, waste handling, storage and environmental requirements may vary by compound, concentration, quantity and jurisdiction. Verify current requirements through shipping papers, SDS, facility documents and applicable DOT, OSHA, EPA, NFPA, state or local authority guidance.

Storage & handling: Ferric arsenate should be stored in tightly closed compatible containers in a secure, cool, dry, well-ventilated toxic-material area away from food, incompatible chemicals, heat and unauthorized access. Prevent dust release, leaks and contaminated runoff.

Advertisement

UN 1606 Quick Details

UN 1606
Product name: Ferric arsenate
DOT Class: 6
Placard type: Toxic
ERG Guide: 151 (check current ERG)
Initial isolation: ERG 151: isolate spill 25m all directions; if large spill isolate 50m; protect water sources from contamination

Common Hazards of UN 1606

  • HIGHLY TOXIC arsenic-containing material; may be fatal if inhaled, ingested or absorbed through skin.
  • Dust or powder can create a serious inhalation and contamination hazard.
  • Avoid skin contact and prevent dust from becoming airborne.
  • Fire or heating may produce toxic arsenic-containing fumes.
  • Runoff from fire control or spill control may pollute waterways.
  • Containers may rupture or fail when heated.
  • Specific toxicity and solubility depend on the exact arsenic compound.

Chemical Identity & Physical Properties

Yellowish-green to brown powder or granular solid. Odorless. Insoluble in water.

Also known asIron arsenateIron(III) arsenateFerric orthoarsenateArsenate of iron
CAS Number10102-49-5
AppearanceYellowish-green to brown powder or granular solid. Odorless. Insoluble in water.
Flash PointNot applicable (non-combustible inorganic solid)
Boiling PointNot applicable (decomposes before boiling)
Vapor DensityNot applicable (solid)
Water ReactivityNo significant reaction with water, though slightly soluble
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 1606

Extinguishing Media

Use extinguishing agents appropriate for the surrounding fire and SDS. Water spray may cool containers or reduce dust only when runoff can be controlled as toxic contamination.

PPE Requirements

⚠️ Level A or B with full face SCBA; impervious chemical protective clothing; avoid any skin contact due to extreme toxicity

Use positive-pressure SCBA for dust, mist, fumes, fire or confined-space exposure. Chemical-resistant gloves, eye/face protection and protective clothing should be selected from SDS; avoid all skin contact and contaminated dust.

Isolation & Evacuation

ERG 151: isolate spill 25m all directions; if large spill isolate 50m; protect water sources from contamination
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 151).

First Actions for a UN 1606 Incident

  • CALL 911. Then call the emergency response telephone number on the shipping paper, if available.
  • Keep unauthorized personnel away.
  • Stay upwind, uphill and/or upstream.
  • Avoid breathing vapors, fumes, dust or mist and avoid all skin or eye contact.
  • Do not touch or walk through spilled material unless properly trained and wearing appropriate protective equipment.
  • Avoid creating dust clouds or spreading contaminated liquid, powder, molten material or runoff.
  • Ventilate closed spaces before entering, but only if properly trained, equipped, monitored and authorized by incident command.
  • Isolate the spill or leak area and expand the perimeter if vapor, dust, fire involvement or unknown concentration is present.
  • Use ERG Guide 151, shipping papers, SDS, air monitoring and incident command for protective actions.
Advertisement

📋 Copy & Share Field Card

UN 1606 — Ferric arsenate
HAZMAT RADIO NOTE — UN 1606 Product: Ferric arsenate Class 6 / Toxic / ERG 151 PPE: Level A or B with full face SCBA; impervious chemical protective clothing; avoid any skin contact due to extreme toxicity ISOLATION: ERG 151: isolate spill 25m all directions; if large spill isolate 50m; protect water sources from contamination ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 1606 — Ferric arsenate Class: 6 | Placard: Toxic | ERG Guide: 151 Appearance: Yellowish-green to brown powder or granular solid. Odorless. Insoluble in water. Water Reactivity: No significant reaction with water, though slightly soluble Extinguishing: Use extinguishing agents appropriate for the surrounding fire and SDS. Water spray may cool containers or reduce dust only when runoff can be controlled as toxic contamination. PPE: Level A or B with full face SCBA; impervious chemical protective clothing; avoid any skin contact due to extreme toxicity Isolation: ERG 151: isolate spill 25m all directions; if large spill isolate 50m; protect water sources from contamination — Key Hazards — • HIGHLY TOXIC arsenic-containing material; may be fatal if inhaled, ingested or absorbed through skin. • Dust or powder can create a serious inhalation and contamination hazard. • Avoid skin contact and prevent dust from becoming airborne. — First Actions — • CALL 911. Then call the emergency response telephone number on the shipping paper, if available. • Keep unauthorized personnel away. • Stay upwind, uphill and/or upstream. • Avoid breathing vapors, fumes, dust or mist and avoid all skin or eye contact. SOURCE: allfirefighter.com/hazmat/un/ferric-arsenate-un-1606 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN1606 Ferric arsenate Cls6 ERG151 | allfirefighter.com/hazmat/un/ferric-arsenate-un-1606SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/ferric-arsenate-un-1606

Related UN Numbers in Class 6

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 1606

UN 1606 is Ferric arsenate, a hazardous material assigned to ERG Guide 151.

No. It is generally not flammable, but fire or heating can produce toxic arsenic-containing fumes.

ERG Guide 151 applies to UN 1606 for initial isolation, protective actions and first response guidance.

UN 1606 presents arsenic dust, fume and ingestion hazards. Heating or fire can create toxic arsenic-containing fumes, and dry powder can contaminate clothing, equipment and surfaces.

Use positive-pressure SCBA for dust, mist, fumes, fire or confined-space exposure. Chemical-resistant gloves, eye/face protection and protective clothing should be selected from SDS; avoid all skin contact and contaminated dust.

Arsenic dust or fumes can contaminate clothing, equipment and surfaces and may be dangerous by inhalation or ingestion.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.