☣️ UN 1690 • CLASS 6
UN 1690 — Sodium fluoride, solid
Placard: Toxic. ERG Guide 154. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.
🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.
Advertisement
UN 1690 Quick Details
UN 1690
Product name: Sodium fluoride, solid
DOT Class: 6
Placard type: Toxic
ERG Guide: 154 (check current ERG)
Initial isolation: ERG 154: isolate spill area at least 25m in all directions; for large spills, consider initial evacuation for 100m downwind
Common Hazards of UN 1690
- TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury
- Contact with molten substance may cause severe burns to skin and eyes.
- Avoid any skin contact.
- Fire may produce irritating, corrosive and/or toxic gases.
- Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental
- Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive
- Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.).
- Corrosives in contact with metals may evolve flammable hydrogen gas.
Chemical Identity & Physical Properties
| Also known as | Sodium fluorideDisodium difluorideFloridineVilliaumiteSodium monofluoride |
| CAS Number | 7681-49-4 |
| Appearance | White to off-white crystalline powder or solid. Odorless. Typically found as a fine powder or granular material at room temperature. |
| Flash Point | Not applicable (inorganic salt) |
| Boiling Point | 1704C (3099F) |
| Vapor Density | Not applicable (solid) |
| Water Reactivity | Dissolves in water with no violent reaction, forming a toxic solution |
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.
Fireground Response Guidance — UN 1690
Extinguishing Media
Dry chemical, soda ash, lime; water may be used for cooling containers
PPE Requirements
⚠️ Level B minimum; SCBA required; chemical-resistant gloves and suit; avoid all skin contact
Isolation & Evacuation
ERG 154: isolate spill area at least 25m in all directions; for large spills, consider initial evacuation for 100m downwind
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 154).
First Actions for a UN 1690 Incident
- CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
- Keep unauthorized personnel away.
- Stay upwind, uphill and/or upstream.
- Ventilate closed spaces before entering, but only if properly trained and equipped.
- Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters
- For highlighted materials: see Table 1 - Initial Isolation and Protective Action Distances.
- For non-highlighted materials: increase the immediate precautionary measure distance, in the downwind
Advertisement
📋 Copy & Share Field Card
UN 1690 — Sodium fluoride, solidHAZMAT RADIO NOTE — UN 1690
Product: Sodium fluoride, solid
Class 6 / Toxic / ERG 154
PPE: Level B minimum; SCBA required; chemical-resistant gloves and suit; avoid all skin contact
ISOLATION: ERG 154: isolate spill area at least 25m in all directions; for large spills, consider initial evacuation for 100m downwind
ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO
Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.
=== IC HAZMAT BRIEFING ===
UN 1690 — Sodium fluoride, solid
Class: 6 | Placard: Toxic | ERG Guide: 154
Appearance: White to off-white crystalline powder or solid. Odorless. Typically found as a fine powder or granular material at room temperature.
Water Reactivity: Dissolves in water with no violent reaction, forming a toxic solution
Extinguishing: Dry chemical, soda ash, lime; water may be used for cooling containers
PPE: Level B minimum; SCBA required; chemical-resistant gloves and suit; avoid all skin contact
Isolation: ERG 154: isolate spill area at least 25m in all directions; for large spills, consider initial evacuation for 100m downwind
— Key Hazards —
• TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury
• Contact with molten substance may cause severe burns to skin and eyes.
• Avoid any skin contact.
— First Actions —
• CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
• Keep unauthorized personnel away.
• Stay upwind, uphill and/or upstream.
• Ventilate closed spaces before entering, but only if properly trained and equipped.
SOURCE: allfirefighter.com/hazmat/un/1690 | Always use current ERG + SOP/SOGIC BRIEFING
Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief. Full chemical + response details.
UN1690 Sodium fluoride, solid Cls6 ERG154 | ERG 154: isolate spill area at least 25m in all directions; for large spills, co | allfirefighter.com/hazmat/un/1690SMS / 160 CHAR
Use for: Quick text to command or incoming units. Fits in a single SMS. Includes link to full page.
⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions.
Page: https://allfirefighter.com/hazmat/un/1690
Advertisement
Frequently Asked Questions about UN 1690
TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Corrosives in contact with metals may evolve flammable hydrogen gas.
CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper Keep unauthorized personnel away. Stay upwind, uphill and/or upstream.
Level B minimum; SCBA required; chemical-resistant gloves and suit; avoid all skin contact
Water reactivity: Dissolves in water with no violent reaction, forming a toxic solution. Recommended extinguishing: Dry chemical, soda ash, lime; water may be used for cooling containers.
ERG Guide 154 recommendation: ERG 154: isolate spill area at least 25m in all directions; for large spills, consider initial evacuation for 100m downwind
No. This is a training/quick-reference aid only. Always consult the current ERG Guide 154 and your department SOP/SOG for incident-specific protective actions.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles.
This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.