☣️ UN 1891 • CLASS 6

UN 1891 — Ethyl bromide

Placard: Toxic. ERG Guide 131. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 1891 is Ethyl bromide, a toxic highly flammable liquid assigned to ERG Guide 131. Vapors can flash back and also create serious inhalation and skin exposure hazards.

Hazard overview: UN 1891 presents toxic vapor, skin absorption, flammable vapor, flashback and sewer explosion hazards. Fire may produce hydrogen bromide and other toxic gases.

Response guidance: For a UN 1891 incident, responders should verify the product with shipping papers, package markings, SDS and ERG Guide 131. Establish incident command, isolate the area, stay upwind, prevent incompatible contact, control runoff and choose entry or fire-control actions based on monitoring, SDS and local SOP.

Firefighter training notes: Training for UN 1891 should emphasize toxic solvent vapor behavior, low-area accumulation, skin exposure, decomposition gas hazards, air monitoring and runoff containment. Use ERG 131, SDS and local SOP.

Regulatory context: Ethyl bromide is regulated as a hazardous material for transportation and emergency response purposes. Transportation, workplace exposure, spill reporting, waste handling, storage and environmental requirements may vary by formulation, concentration, quantity and jurisdiction. Verify current requirements through shipping papers, SDS, facility documents and applicable DOT, OSHA, EPA, NFPA, state or local authority guidance.

Storage & handling: Ethyl bromide should be stored in tightly closed compatible containers in a cool, well-ventilated toxic-solvent area away from heat, ignition sources where applicable, strong oxidizers, reactive metals where incompatible and drains.

Advertisement

UN 1891 Quick Details

UN 1891
Product name: Ethyl bromide
DOT Class: 6
Placard type: Toxic
ERG Guide: 131 (check current ERG)
Initial isolation: ERG 131: isolate spill/leak area 50m in all directions; for large spill isolate 150m; evacuate downwind if fire involves tank cars or large containers

Common Hazards of UN 1891

  • TOXIC and HIGHLY FLAMMABLE liquid; inhalation, ingestion or skin absorption may cause serious injury.
  • Vapors may form explosive mixtures with air and travel to ignition sources.
  • Vapors are heavier than air and may collect in low or confined areas.
  • Contact may irritate or burn eyes and skin.
  • Fire may produce hydrogen bromide and other toxic/corrosive gases.
  • Runoff to sewers may create fire, explosion and contamination hazards.
  • Containers may rupture or explode when heated.

Chemical Identity & Physical Properties

Colorless to yellowish liquid with a sweet, chloroform-like odor. Volatile and readily vaporizes at room temperature.

Also known asBromoethaneMonobromoethaneEthyl bromideHalon 2001
CAS Number74-96-4
AppearanceColorless to yellowish liquid with a sweet, chloroform-like odor. Volatile and readily vaporizes at room temperature.
Flash Point-23°C (-9°F)
Boiling Point38°C (100°F)
Vapor Density3.7 (heavier than air)
Water ReactivityNo significant reaction with water; slightly soluble
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 1891

Extinguishing Media

Use alcohol-resistant foam, dry chemical or CO2. Water spray may cool containers from a protected position, but runoff and vapor spread must be controlled.

PPE Requirements

⚠️ Level B minimum with SCBA; neoprene or butyl rubber gloves and suit recommended due to skin absorption hazard

Use positive-pressure SCBA for vapor, fire or confined-space exposure. Chemical-resistant gloves, eye/face protection and protective clothing should be selected from SDS to prevent solvent skin contact.

Isolation & Evacuation

ERG 131: isolate spill/leak area 50m in all directions; for large spill isolate 150m; evacuate downwind if fire involves tank cars or large containers
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 131).

First Actions for a UN 1891 Incident

  • CALL 911. Then call the emergency response telephone number on the shipping paper, if available.
  • Keep unauthorized personnel away.
  • Stay upwind, uphill and/or upstream.
  • Avoid breathing vapors, fumes, dust, mist or spray and avoid skin or eye contact.
  • Eliminate ignition sources if safe and keep vapors out of drains, sewers and low areas.
  • Do not touch or walk through spilled material unless properly trained and wearing appropriate protective equipment.
  • Ventilate closed spaces before entering, but only if properly trained, equipped, monitored and authorized by incident command.
  • Isolate the spill or leak area and expand the perimeter if vapor, dust, fire involvement, water reaction or unknown concentration is present.
  • Use ERG Guide 131, shipping papers, SDS, air monitoring and incident command for protective actions.
Advertisement

📋 Copy & Share Field Card

UN 1891 — Ethyl bromide
HAZMAT RADIO NOTE — UN 1891 Product: Ethyl bromide Class 6 / Toxic / ERG 131 PPE: Level B minimum with SCBA; neoprene or butyl rubber gloves and suit recommended due to skin absorption hazard ISOLATION: ERG 131: isolate spill/leak area 50m in all directions; for large spill isolate 150m; evacuate downwind if fire involves tank cars or large containers ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 1891 — Ethyl bromide Class: 6 | Placard: Toxic | ERG Guide: 131 Appearance: Colorless to yellowish liquid with a sweet, chloroform-like odor. Volatile and readily vaporizes at room temperature. Water Reactivity: No significant reaction with water; slightly soluble Extinguishing: Use alcohol-resistant foam, dry chemical or CO2. Water spray may cool containers from a protected position, but runoff and vapor spread must be controlled. PPE: Level B minimum with SCBA; neoprene or butyl rubber gloves and suit recommended due to skin absorption hazard Isolation: ERG 131: isolate spill/leak area 50m in all directions; for large spill isolate 150m; evacuate downwind if fire involves tank cars or large containers — Key Hazards — • TOXIC and HIGHLY FLAMMABLE liquid; inhalation, ingestion or skin absorption may cause serious injury. • Vapors may form explosive mixtures with air and travel to ignition sources. • Vapors are heavier than air and may collect in low or confined areas. — First Actions — • CALL 911. Then call the emergency response telephone number on the shipping paper, if available. • Keep unauthorized personnel away. • Stay upwind, uphill and/or upstream. • Avoid breathing vapors, fumes, dust, mist or spray and avoid skin or eye contact. SOURCE: allfirefighter.com/hazmat/un/ethyl-bromide-un-1891 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN1891 Ethyl bromide Cls6 ERG131 | allfirefighter.com/hazmat/un/ethyl-bromide-un-1891SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/ethyl-bromide-un-1891

Related UN Numbers in Class 6

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 1891

UN 1891 is Ethyl bromide, a hazardous material assigned to ERG Guide 131.

Yes. It is highly flammable and vapors may form explosive mixtures with air.

ERG Guide 131 applies to UN 1891 for initial isolation, protective actions and first response guidance.

UN 1891 presents toxic vapor, skin absorption, flammable vapor, flashback and sewer explosion hazards. Fire may produce hydrogen bromide and other toxic gases.

Use positive-pressure SCBA for vapor, fire or confined-space exposure. Chemical-resistant gloves, eye/face protection and protective clothing should be selected from SDS to prevent solvent skin contact.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.