☣️ UN 2010 • CLASS 4

UN 2010 — Magnesium hydride

Placard: Dangerous When Wet. ERG Guide 138. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 2010 is Magnesium hydride, a dangerous-when-wet metal hydride assigned to ERG Guide 138. Water or moist air can release flammable hydrogen gas and heat.

Hazard overview: DANGEROUS WHEN WET metal hydride; contact with water or moist air produces flammable hydrogen gas. Reaction may generate heat and ignite spontaneously. May be ignited by heat, sparks or flames.

Response guidance: For a UN 2010 incident, verify the product with shipping papers, container markings, SDS and ERG Guide 138. Establish incident command, isolate the area, stay upwind, prevent incompatible contact, control runoff or dust spread and base entry/fire-control actions on monitoring and local SOP.

Firefighter training notes: Training for UN 2010 should emphasize moisture exclusion, dry-agent/Class D tactics where appropriate, hydrogen or ammonia gas generation, re-ignition and dust control. Use ERG 138, SDS and local SOP.

Regulatory context: Magnesium hydride is regulated as a hazardous material for transportation and emergency response purposes. Storage, workplace exposure, emergency planning, spill reporting, waste handling and environmental requirements vary by exact product, concentration, quantity and jurisdiction. Verify current requirements through shipping papers, SDS, container markings and applicable DOT, OSHA, EPA, NFPA, state or local authority guidance.

Storage & handling: Magnesium hydride should be stored dry in compatible sealed containers away from water, moisture, oxidizers, acids where incompatible, ignition sources and unauthorized access. Keep compatible dry extinguishing media available and prevent dust generation.

Advertisement

UN 2010 Quick Details

UN 2010
Product name: Magnesium hydride
DOT Class: 4
Placard type: Dangerous When Wet
ERG Guide: 138 (check current ERG)
Initial isolation: ERG 138: isolate spill 25m all directions; if fire, isolate 800m and consider evacuation 800m downwind

Common Hazards of UN 2010

  • DANGEROUS WHEN WET metal hydride; contact with water or moist air produces flammable hydrogen gas.
  • Reaction may generate heat and ignite spontaneously.
  • May be ignited by heat, sparks or flames.
  • Water, foam or CO2 may worsen reaction or spread fire.
  • May re-ignite after apparent extinguishment.
  • Dust or decomposition products may irritate eyes, skin and respiratory tissue.
  • Containers may rupture or fail when heated.

Chemical Identity & Physical Properties

White to gray crystalline powder or solid. Odorless. Stable when dry but highly reactive with moisture.

Also known asMagnesium dihydrideMgH2Magnesium hydride powder
CAS Number7693-27-8
AppearanceWhite to gray crystalline powder or solid. Odorless. Stable when dry but highly reactive with moisture.
Flash PointNot applicable (water-reactive solid, pyrophoric when moist)
Boiling PointNot applicable (decomposes above 280C/536F)
Vapor DensityNot applicable (solid material)
Water ReactivityReacts violently with water producing flammable hydrogen gas and heat; may ignite spontaneously
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 2010

Extinguishing Media

Use dry sand, dry chemical, dry powder/Class D agent where appropriate, soda ash or other SDS-approved dry media. Do not apply water, foam or CO2 directly unless a specialist confirms compatibility.

PPE Requirements

⚠️ Level B minimum in dry conditions; full face SCBA required; chemical-resistant suit; avoid moisture exposure

Use positive-pressure SCBA for smoke, dust or fire exposure. Wear fire-resistant and chemical-resistant protection selected from SDS; avoid moisture contamination and dust generation.

Isolation & Evacuation

ERG 138: isolate spill 25m all directions; if fire, isolate 800m and consider evacuation 800m downwind
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 138).

First Actions for a UN 2010 Incident

  • CALL 911. Then call the emergency response telephone number on the shipping paper, if available.
  • Keep unauthorized personnel away.
  • Stay upwind, uphill and/or upstream.
  • Avoid breathing dust, vapor, fumes, mist or smoke and avoid skin or eye contact.
  • Keep water, foam and moisture away from the material unless incident command confirms a compatible control use.
  • Do not touch damaged containers or spilled material unless properly trained and wearing appropriate protective equipment.
  • Ventilate closed spaces before entering, but only if properly trained, equipped, monitored and authorized by incident command.
  • Isolate the spill or release area and expand the perimeter for fire involvement, water reaction, vapor generation, dust spread or unknown product identity.
  • Use ERG Guide 138, shipping papers, SDS, air monitoring and incident command for protective actions.
Advertisement

📋 Copy & Share Field Card

UN 2010 — Magnesium hydride
HAZMAT RADIO NOTE — UN 2010 Product: Magnesium hydride Class 4 / Dangerous When Wet / ERG 138 PPE: Level B minimum in dry conditions; full face SCBA required; chemical-resistant suit; avoid moisture exposure ISOLATION: ERG 138: isolate spill 25m all directions; if fire, isolate 800m and consider evacuation 800m downwind ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 2010 — Magnesium hydride Class: 4 | Placard: Dangerous When Wet | ERG Guide: 138 Appearance: White to gray crystalline powder or solid. Odorless. Stable when dry but highly reactive with moisture. Water Reactivity: Reacts violently with water producing flammable hydrogen gas and heat; may ignite spontaneously Extinguishing: Use dry sand, dry chemical, dry powder/Class D agent where appropriate, soda ash or other SDS-approved dry media. Do not apply water, foam or CO2 directly unless a specialist confirms compatibility. PPE: Level B minimum in dry conditions; full face SCBA required; chemical-resistant suit; avoid moisture exposure Isolation: ERG 138: isolate spill 25m all directions; if fire, isolate 800m and consider evacuation 800m downwind — Key Hazards — • DANGEROUS WHEN WET metal hydride; contact with water or moist air produces flammable hydrogen gas. • Reaction may generate heat and ignite spontaneously. • May be ignited by heat, sparks or flames. — First Actions — • CALL 911. Then call the emergency response telephone number on the shipping paper, if available. • Keep unauthorized personnel away. • Stay upwind, uphill and/or upstream. • Avoid breathing dust, vapor, fumes, mist or smoke and avoid skin or eye contact. SOURCE: allfirefighter.com/hazmat/un/magnesium-hydride-un-2010 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN2010 Magnesium hydride Cls4 ERG138 | allfirefighter.com/hazmat/un/magnesium-hydride-un-2010SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/magnesium-hydride-un-2010

Related UN Numbers in Class 4

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 2010

UN 2010 is Magnesium hydride, a hazardous material assigned to ERG Guide 138.

Yes. It can generate flammable hydrogen gas on water contact and may ignite.

ERG Guide 138 applies to UN 2010 for initial isolation, protective actions and first response guidance.

DANGEROUS WHEN WET metal hydride; contact with water or moist air produces flammable hydrogen gas. Reaction may generate heat and ignite spontaneously. May be ignited by heat, sparks or flames.

Use positive-pressure SCBA for smoke, dust or fire exposure. Wear fire-resistant and chemical-resistant protection selected from SDS; avoid moisture contamination and dust generation.

Do not apply water directly unless a hazmat specialist confirms compatibility. Moisture can increase heat, ignition or flammable gas generation.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.