☣️ UN 3431 • CLASS 6

Nitrobenzotrifluorides, solid

Placard: Toxic. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.
Advertisement
Quick details
UN 3431
Class: 6
Placard type: Toxic
ERG: Guide 152 (check current ERG)
Isolation: ERG 152: isolate 25m minimum initially; if fire or large spill, isolate 800m downwind, evacuate 1600m if tank/rail car involved
Chemical & Response Details
Also known asTrifluoronitrobenzeneNitrotrifluorobenzeneNBTFFluorinated nitrobenzene isomers
AppearancePale yellow to amber crystalline solid at room temperature. Aromatic odor characteristic of nitro compounds. May be shipped as molten liquid.
Flash Point103-110C (217-230F) depending on isomer
Boiling Point200-220C (392-428F) depending on isomer position
Vapor Density6.5-7.0 (heavier than air)
Water ReactivityNo significant reaction with water, but insoluble and will form separate layer
ExtinguishingAlcohol-resistant foam, CO2, dry chemical, water spray for cooling only
PPE⚠️ Level A minimum for spills; full encapsulation required; SCBA mandatory; chemically resistant suit; avoid all skin contact with solid or molten material
IsolationERG 152: isolate 25m minimum initially; if fire or large spill, isolate 800m downwind, evacuate 1600m if tank/rail car involved
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.
Common hazards (high level)
  • Highly toxic, may be fatal if inhaled, ingested or absorbed through skin.
  • Contact with molten substance may cause severe burns to skin and eyes.
  • Avoid any skin contact.
  • Fire may produce irritating, corrosive and/or toxic gases.
  • Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental
  • Combustible material: may burn but does not ignite readily.
  • Containers may explode when heated.
  • Those substances designated with a (P) may polymerize explosively when heated or involved in a fire.
First actions (field-minded)
  • CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
  • Keep unauthorized personnel away.
  • Stay upwind, uphill and/or upstream.
  • Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters
  • For highlighted materials: see Table 1 - Initial Isolation and Protective Action Distances.
  • For non-highlighted materials: increase the immediate precautionary measure distance, in the downwind
Advertisement
📋 Copy & Share
UN 3431 — Nitrobenzotrifluorides, solid
HAZMAT RADIO NOTE — UN 3431 Product: Nitrobenzotrifluorides, solid Class 6 / Toxic / ERG 152 PPE: Level A minimum for spills; full encapsulation required; SCBA mandatory; chemically resistant suit; avoid all skin contact with solid or molten material ISOLATION: ERG 152: isolate 25m minimum initially; if fire or large spill, isolate 800m downwind, evacuate 1600m if tank/rail car involved ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 3431 — Nitrobenzotrifluorides, solid Class: 6 | Placard: Toxic | ERG Guide: 152 Appearance: Pale yellow to amber crystalline solid at room temperature. Aromatic odor characteristic of nitro compounds. May be shipped as molten liquid. Water Reactivity: No significant reaction with water, but insoluble and will form separate layer Extinguishing: Alcohol-resistant foam, CO2, dry chemical, water spray for cooling only PPE: Level A minimum for spills; full encapsulation required; SCBA mandatory; chemically resistant suit; avoid all skin contact with solid or molten material Isolation: ERG 152: isolate 25m minimum initially; if fire or large spill, isolate 800m downwind, evacuate 1600m if tank/rail car involved — Key Hazards — • Highly toxic, may be fatal if inhaled, ingested or absorbed through skin. • Contact with molten substance may cause severe burns to skin and eyes. • Avoid any skin contact. — First Actions — • CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper • Keep unauthorized personnel away. • Stay upwind, uphill and/or upstream. • Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters SOURCE: allfirefighter.com/hazmat/un/3431 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief. Full chemical + response details.

SMS (short)
UN3431 Nitrobenzotrifluorides, solid Cls6 ERG152 | allfirefighter.com/hazmat/un/3431SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS. Includes link to full page.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/3431
Related UN numbers (same class)
Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

FAQ

Highly toxic, may be fatal if inhaled, ingested or absorbed through skin. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental Combustible material: may burn but does not ignite readily. Containers may explode when heated. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire.

CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper Keep unauthorized personnel away. Stay upwind, uphill and/or upstream.

Level A minimum for spills; full encapsulation required; SCBA mandatory; chemically resistant suit; avoid all skin contact with solid or molten material

No. This is a training/quick-reference aid only. Always consult the current ERG Guide 152 and your department SOP/SOG for incident-specific protective actions.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.