☣️ UN 3452 • CLASS 6
Xylidines, solid
Placard: Toxic. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.
🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.
Advertisement
Quick details
UN 3452
Class: 6
Placard type: Toxic
ERG: Guide 153 (check current ERG)
Isolation: ERG 153: Isolate spill area immediate 50m in all directions. If tank/rail car involved in fire, isolate 800m in all directions and consider evacuation for 800m.
Chemical & Response Details
| Also known as | DimethylanilineDimethylbenzeneamineAminoxyleneMixed xylidinesMethyltoluidines |
| Appearance | White to yellowish-brown crystalline solid at room temperature. Sweet, aromatic amine odor. May darken upon exposure to air and light. |
| Flash Point | 97C (207F) |
| Boiling Point | 213-226C (415-439F) depending on isomer |
| Vapor Density | 4.2 (heavier than air) |
| Water Reactivity | No significant reaction with water. Slightly soluble in water. |
| Extinguishing | Alcohol-resistant foam, dry chemical, CO2. Water spray may be used to keep containers cool. |
| PPE | ⚠️ Level B minimum required. Full chemical protective suit with SCBA for spills or fire. Prevent skin and eye contact as material is absorbed through skin. |
| Isolation | ERG 153: Isolate spill area immediate 50m in all directions. If tank/rail car involved in fire, isolate 800m in all directions and consider evacuation for 800m. |
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.
Common hazards (high level)
- TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury
- Methyl bromoacetate (UN2643) is an eye irritant/lachrymator (causes flow of tears).
- Contact with molten substance may cause severe burns to skin and eyes.
- Avoid any skin contact.
- Fire may produce irritating, corrosive and/or toxic gases.
- Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental
- Combustible material: may burn but does not ignite readily.
- When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion
First actions (field-minded)
- CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
- Keep unauthorized personnel away.
- Stay upwind, uphill and/or upstream.
- Ventilate closed spaces before entering, but only if properly trained and equipped.
- Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters
- For highlighted materials: see Table 1 - Initial Isolation and Protective Action Distances.
- For non-highlighted materials: increase the immediate precautionary measure distance, in the downwind
Advertisement
📋 Copy & Share
UN 3452 — Xylidines, solid HAZMAT RADIO NOTE — UN 3452
Product: Xylidines, solid
Class 6 / Toxic / ERG 153
PPE: Level B minimum required. Full chemical protective suit with SCBA for spills or fire. Prevent skin and eye contact as material is absorbed through skin.
ISOLATION: ERG 153: Isolate spill area immediate 50m in all directions. If tank/rail car involved in fire, isolate 800m in all directions and consider evacuation for 800m.
ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO
Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.
=== IC HAZMAT BRIEFING ===
UN 3452 — Xylidines, solid
Class: 6 | Placard: Toxic | ERG Guide: 153
Appearance: White to yellowish-brown crystalline solid at room temperature. Sweet, aromatic amine odor. May darken upon exposure to air and light.
Water Reactivity: No significant reaction with water. Slightly soluble in water.
Extinguishing: Alcohol-resistant foam, dry chemical, CO2. Water spray may be used to keep containers cool.
PPE: Level B minimum required. Full chemical protective suit with SCBA for spills or fire. Prevent skin and eye contact as material is absorbed through skin.
Isolation: ERG 153: Isolate spill area immediate 50m in all directions. If tank/rail car involved in fire, isolate 800m in all directions and consider evacuation for 800m.
— Key Hazards —
• TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury
• Methyl bromoacetate (UN2643) is an eye irritant/lachrymator (causes flow of tears).
• Contact with molten substance may cause severe burns to skin and eyes.
— First Actions —
• CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
• Keep unauthorized personnel away.
• Stay upwind, uphill and/or upstream.
• Ventilate closed spaces before entering, but only if properly trained and equipped.
SOURCE: allfirefighter.com/hazmat/un/3452 | Always use current ERG + SOP/SOGIC BRIEFING
Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief. Full chemical + response details.
UN3452 Xylidines, solid Cls6 ERG153 | ERG 153: Isolate spill area immediate 50m in all directions. If tank/rail car in | allfirefighter.com/hazmat/un/3452SMS / 160 CHAR
Use for: Quick text to command or incoming units. Fits in a single SMS. Includes link to full page.
⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/3452
Advertisement
FAQ
TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury Methyl bromoacetate (UN2643) is an eye irritant/lachrymator (causes flow of tears). Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion
CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper Keep unauthorized personnel away. Stay upwind, uphill and/or upstream.
Level B minimum required. Full chemical protective suit with SCBA for spills or fire. Prevent skin and eye contact as material is absorbed through skin.
No. This is a training/quick-reference aid only. Always consult the current ERG Guide 153 and your department SOP/SOG for incident-specific protective actions.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.