UN 2506 — Ammonium hydrogen sulphate
Placard: Corrosive. ERG Guide 154. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.
UN 2506 At a Glance
UN 2506 (Ammonium hydrogen sulphate) is listed as DOT Class 8 Corrosive and is assigned to ERG Guide 154. Use this page to review placard data, common hazards, PPE notes, isolation context, first actions, and related UN numbers.
UN 2506 is Ammonium hydrogen sulphate, a corrosive acidic salt assigned to ERG Guide 154. Dust or solution can burn tissue and create acidic runoff.
Hazard overview: CORROSIVE acidic salt; dust or solution can burn eyes, skin and respiratory tissue. Dissolves in water to form acidic solution and may release heat. Non-combustible, but heating can produce sulfur oxides and acidic fumes.
Response guidance: For UN 2506, isolate the area, avoid skin contact and use SCBA where vapor, dust, mist or fire is present. Contain toxic/corrosive runoff and verify product controls with SDS and ERG 154.
Firefighter training notes: Training for UN 2506 should emphasize toxic/corrosive exposure routes, skin absorption, SCBA use, decontamination, runoff containment and SDS verification. Use ERG 154, SDS and local SOP.
Regulatory context: Ammonium hydrogen sulphate is regulated as a hazardous material for transport and emergency response. Storage, exposure, spill reporting, waste and fire-code duties depend on quantity, concentration and jurisdiction; verify shipping papers, SDS and local authority requirements.
Storage & handling: Ammonium hydrogen sulphate should be stored in tightly closed compatible containers with ventilation, secondary containment, restricted access and SDS-based segregation from incompatible materials.
UN 2506 Quick Details
Common Hazards of UN 2506
- CORROSIVE acidic salt; dust or solution can burn eyes, skin and respiratory tissue.
- Dissolves in water to form acidic solution and may release heat.
- Non-combustible, but heating can produce sulfur oxides and acidic fumes.
- Contact with metals may generate flammable hydrogen gas under some conditions.
- Runoff may be acidic, corrosive and harmful to waterways.
- Containers may fail when heated or exposed to moisture.
- Avoid dust generation and prevent acidic runoff spread.
Chemical Identity & Physical Properties
White to gray crystalline solid or powder. Odorless or slight ammonia odor. Hygroscopic and may form lumps when exposed to moisture.
| Also known as | Ammonium bisulfateAmmonium hydrogen sulfateMonoammonium sulfateSulfuric acid monoammonium salt |
| CAS Number | 7803-63-6 |
| Appearance | White to gray crystalline solid or powder. Odorless or slight ammonia odor. Hygroscopic and may form lumps when exposed to moisture. |
| Flash Point | Not applicable (non-flammable solid) |
| Boiling Point | Decomposes at approximately 147C (297F) releasing ammonia and sulfur dioxide |
| Vapor Density | Not applicable (solid) |
| Water Reactivity | Dissolves in water to form acidic solution. No violent reaction but solution is corrosive. |
Fireground Response Guidance — UN 2506
Extinguishing Media
PPE Requirements
Use positive-pressure SCBA for vapor, dust, mist, fire or confined-space exposure. Wear chemical-resistant gloves, boots, eye/face protection and protective clothing.
Isolation & Evacuation
First Actions for a UN 2506 Incident
- Call 911 and the emergency response number on the shipping paper, if available.
- Keep unauthorized personnel away and establish incident command.
- Stay upwind, uphill and upstream.
- Avoid breathing vapor, dust, mist, smoke or fumes and avoid skin or eye contact.
- Do not touch damaged containers or spilled material without proper training and PPE.
- Prevent contaminated dust, liquid, runoff and decontamination waste from spreading.
- Ventilate confined spaces only after monitoring and only if properly trained and equipped.
- Use ERG Guide 154, SDS, shipping papers and monitoring to set isolation, evacuation and entry decisions.
📋 Copy & Share Field Card
UN 2506 — Ammonium hydrogen sulphateUse for: Quick radio or face-to-face size-up. Short, structured, field-ready.
Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.
Use for: Quick text to command or incoming units. Fits in a single SMS.