☣️ UN 1652 • CLASS 6

UN 1652 — Naphthylurea

Placard: Toxic. ERG Guide 153. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 1652 is Naphthylurea, a toxic organic solid assigned to ERG Guide 153. Responders should avoid dust exposure, skin contact and contaminated runoff.

Hazard overview: UN 1652 presents toxic dust, ingestion and skin-contact hazards. Fire may produce irritating or toxic gases, and dry powder can contaminate clothing, tools and surfaces.

Response guidance: For a UN 1652 incident, responders should verify the product with shipping papers, package markings, SDS and ERG Guide 153. Establish incident command, isolate the area, stay upwind, prevent dust or vapor exposure, control runoff and choose entry or cleanup actions based on monitoring, SDS and local SOP.

Firefighter training notes: Training for UN 1652 should emphasize toxic dust exposure, combustible organic solid behavior, PPE selection, decontamination and runoff control. Use ERG 153, SDS and local SOP.

Regulatory context: Naphthylurea is regulated as a hazardous material for transportation and emergency response purposes. Transportation, workplace exposure, spill reporting, waste handling, storage and environmental requirements may vary by formulation, concentration, quantity and jurisdiction. Verify current requirements through shipping papers, SDS, facility documents and applicable DOT, OSHA, EPA, NFPA, state or local authority guidance.

Storage & handling: Naphthylurea should be stored in tightly closed compatible containers in a secure toxic-material area according to SDS and local hazardous materials procedures.

Advertisement

UN 1652 Quick Details

UN 1652
Product name: Naphthylurea
DOT Class: 6
Placard type: Toxic
ERG Guide: 153 (check current ERG)
Initial isolation: ERG 153: isolate spill area at least 25m in all directions; if large spill consider initial evacuation 100m downwind

Common Hazards of UN 1652

  • TOXIC organic solid; inhalation, ingestion or skin contact may cause serious injury.
  • Dust can create inhalation and surface contamination hazards.
  • Combustible material: may burn but does not ignite readily.
  • Fire may produce irritating, corrosive and/or toxic gases.
  • Runoff may carry toxic contamination to drains or waterways.
  • Containers may rupture or fail when heated.
  • Specific toxicity depends on formulation and should be verified from SDS.

Chemical Identity & Physical Properties

White to grayish crystalline powder or solid. Odorless or slight characteristic odor. Stable at room temperature.

Also known as1-Naphthylureaalpha-Naphthylurea1-(1-Naphthyl)ureaN-1-NaphthylureaANTU
CAS Number86-88-4
AppearanceWhite to grayish crystalline powder or solid. Odorless or slight characteristic odor. Stable at room temperature.
Flash PointNot applicable (non-flammable solid)
Boiling PointNot applicable (decomposes before boiling)
Vapor DensityNot applicable (solid with negligible vapor pressure)
Water ReactivityNo significant reaction with water; low solubility
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 1652

Extinguishing Media

Use extinguishing agents appropriate for the surrounding fire and SDS. Water spray may cool containers or reduce dust only when runoff can be controlled as toxic contamination.

PPE Requirements

⚠️ Level B minimum recommended; SCBA and chemical-resistant suit required for spill response; avoid all contact with skin and eyes

Use positive-pressure SCBA for dust, fire or confined-space exposure. Chemical-resistant gloves, eye/face protection and protective clothing should be selected from SDS; avoid dust and contaminated skin contact.

Isolation & Evacuation

ERG 153: isolate spill area at least 25m in all directions; if large spill consider initial evacuation 100m downwind
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 153).

First Actions for a UN 1652 Incident

  • CALL 911. Then call the emergency response telephone number on the shipping paper, if available.
  • Keep unauthorized personnel away.
  • Stay upwind, uphill and/or upstream.
  • Avoid breathing vapors, fumes, dust or mist and avoid all skin or eye contact.
  • Do not touch or walk through spilled material unless properly trained and wearing appropriate protective equipment.
  • Avoid creating dust clouds or spreading contaminated liquid, powder, solution, runoff or debris.
  • Ventilate closed spaces before entering, but only if properly trained, equipped, monitored and authorized by incident command.
  • Isolate the spill or leak area and expand the perimeter if dust, vapor, fire involvement or unknown concentration is present.
  • Use ERG Guide 153, shipping papers, SDS, air monitoring and incident command for protective actions.
Advertisement

📋 Copy & Share Field Card

UN 1652 — Naphthylurea
HAZMAT RADIO NOTE — UN 1652 Product: Naphthylurea Class 6 / Toxic / ERG 153 PPE: Level B minimum recommended; SCBA and chemical-resistant suit required for spill response; avoid all contact with skin and eyes ISOLATION: ERG 153: isolate spill area at least 25m in all directions; if large spill consider initial evacuation 100m downwind ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 1652 — Naphthylurea Class: 6 | Placard: Toxic | ERG Guide: 153 Appearance: White to grayish crystalline powder or solid. Odorless or slight characteristic odor. Stable at room temperature. Water Reactivity: No significant reaction with water; low solubility Extinguishing: Use extinguishing agents appropriate for the surrounding fire and SDS. Water spray may cool containers or reduce dust only when runoff can be controlled as toxic contamination. PPE: Level B minimum recommended; SCBA and chemical-resistant suit required for spill response; avoid all contact with skin and eyes Isolation: ERG 153: isolate spill area at least 25m in all directions; if large spill consider initial evacuation 100m downwind — Key Hazards — • TOXIC organic solid; inhalation, ingestion or skin contact may cause serious injury. • Dust can create inhalation and surface contamination hazards. • Combustible material: may burn but does not ignite readily. — First Actions — • CALL 911. Then call the emergency response telephone number on the shipping paper, if available. • Keep unauthorized personnel away. • Stay upwind, uphill and/or upstream. • Avoid breathing vapors, fumes, dust or mist and avoid all skin or eye contact. SOURCE: allfirefighter.com/hazmat/un/naphthylurea-un-1652 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN1652 Naphthylurea Cls6 ERG153 | allfirefighter.com/hazmat/un/naphthylurea-un-1652SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/naphthylurea-un-1652

Related UN Numbers in Class 6

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 1652

UN 1652 is Naphthylurea, a hazardous material assigned to ERG Guide 153.

It is generally not readily flammable, but organic solid material may burn under fire conditions.

ERG Guide 153 applies to UN 1652 for initial isolation, protective actions and first response guidance.

UN 1652 presents toxic dust, ingestion and skin-contact hazards. Fire may produce irritating or toxic gases, and dry powder can contaminate clothing, tools and surfaces.

Use positive-pressure SCBA for dust, fire or confined-space exposure. Chemical-resistant gloves, eye/face protection and protective clothing should be selected from SDS; avoid dust and contaminated skin contact.

Yes. Dust can create inhalation and surface contamination hazards even when the solid is not readily flammable.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.