☣️ UN 3390 • CLASS 6

UN 3390 — Poisonous by inhalation liquid, corrosive, n.o.s. (Inhalation Hazard Zone B)

Placard: Toxic. ERG Guide 154. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ Verification required: Broad or variable material category; verify exact product, SDS and shipping papers.
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 3390 is Poisonous by inhalation liquid, corrosive, n.o.s. (Inhalation Hazard Zone B), a not-otherwise-specified hazmat entry assigned to ERG Guide 154. The exact product name on shipping papers and the SDS determine the final hazards, but initial response should assume the listed DOT hazard until proven otherwise.

Hazard overview: Zone B inhalation toxicity is the controlling hazard; severe chemical burns. Treat unknown releases as immediately dangerous.

Response guidance: For UN 3390, establish hot/warm/cold zones, isolate the area, evacuate downwind as ERG 154 directs, control ignition if flammable, and wait for trained hazmat entry with monitoring.

Advertisement

UN 3390 Quick Details

UN 3390
Product name: Poisonous by inhalation liquid, corrosive, n.o.s. (Inhalation Hazard Zone B)
DOT Class: 6
Placard type: Toxic
ERG Guide: 154 (check current ERG)
Initial isolation: ERG 154: Small spill - isolate 30m all directions. Large spill - isolate 100m all directions, evacuate 300m downwind. If tank/rail car involved in fire, isolate 800m all directions.

Common Hazards of UN 3390

  • TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury
  • Contact with molten substance may cause severe burns to skin and eyes.
  • Avoid any skin contact.
  • Fire may produce irritating, corrosive and/or toxic gases.
  • Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental contamination.
  • Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive
  • Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.).
  • Corrosives in contact with metals may evolve flammable hydrogen gas.

Chemical Identity & Physical Properties

Appearance and physical behavior vary by the exact product shipped under this n.o.s. entry. Use container labels, shipping papers and SDS before assuming odor, color, volatility or water reactivity.

Also known asToxic inhalation hazard liquid corrosive NOSPIH liquid corrosive Zone BCorrosive toxic liquid NOSTIH corrosive liquid
AppearanceN.o.s. (not otherwise specified) entry encompasses various corrosive liquids with significant inhalation toxicity. Physical properties vary by specific substance; typically liquids at room temperature with potentially pungent or irritating odors.
Flash PointVaries by specific substance - refer to SDS for actual material
Boiling PointVaries by specific substance - refer to SDS for actual material
Vapor DensityTypically heavier than air (>1.0) - refer to SDS for actual material
Water ReactivityMay react with water depending on specific substance; corrosive properties may be enhanced. Avoid direct water contact unless specific substance is known to be water-compatible.
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 3390

Extinguishing Media

Use caution with foam - corrosive nature may break down some foams. Dry chemical, CO2, or appropriate extinguishing agent based on specific substance. Consult ERG 154 for guidance.

PPE Requirements

⚠️ Level A required for unknown substances or major spills. SCBA mandatory. Full chemical-resistant suit with double gloves. Avoid all skin and eye contact. Respiratory protection critical due to inhalation hazard classification.

Level A vapor-protective PPE with positive-pressure SCBA is appropriate for unknown or active releases. Avoid all skin contact and downgrade only after monitoring and product identification.

Isolation & Evacuation

ERG 154: Small spill - isolate 30m all directions. Large spill - isolate 100m all directions, evacuate 300m downwind. If tank/rail car involved in fire, isolate 800m all directions.
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 154).

First Actions for a UN 3390 Incident

  • CALL 911. Then call the emergency response telephone number on the shipping paper, if available.
  • Keep unauthorized personnel away.
  • Stay upwind, uphill and/or upstream.
  • Ventilate closed spaces before entering, but only if properly trained and equipped.
  • Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters
  • For highlighted materials: see Table 1 - Initial Isolation and Protective Action Distances.
  • For non-highlighted materials: increase the immediate precautionary measure distance, in the downwind direction.
Advertisement

📋 Copy & Share Field Card

UN 3390 — Poisonous by inhalation liquid, corrosiv
HAZMAT RADIO NOTE — UN 3390 Product: Poisonous by inhalation liquid, corrosive, n.o.s. (Inhalation Hazard Zone B) Class 6 / Toxic / ERG 154 PPE: Level A required for unknown substances or major spills. SCBA mandatory. Full chemical-resistant suit with double gloves. Avoid all skin and eye contact. Respiratory protection critical due to inhalation hazard classification. ISOLATION: ERG 154: Small spill - isolate 30m all directions. Large spill - isolate 100m all directions, evacuate 300m downwind. If tank/rail car involved in fire, isolate 800m all directions. ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 3390 — Poisonous by inhalation liquid, corrosive, n.o.s. (Inhalation Hazard Zone B) Class: 6 | Placard: Toxic | ERG Guide: 154 Appearance: N.o.s. (not otherwise specified) entry encompasses various corrosive liquids with significant inhalation toxicity. Physical properties vary by specific substance; typically liquids at room temperature with potentially pungent or irritating odors. Water Reactivity: May react with water depending on specific substance; corrosive properties may be enhanced. Avoid direct water contact unless specific substance is known to be water-compatible. Extinguishing: Use caution with foam - corrosive nature may break down some foams. Dry chemical, CO2, or appropriate extinguishing agent based on specific substance. Consult ERG 154 for guidance. PPE: Level A required for unknown substances or major spills. SCBA mandatory. Full chemical-resistant suit with double gloves. Avoid all skin and eye contact. Respiratory protection critical due to inhalation hazard classification. Isolation: ERG 154: Small spill - isolate 30m all directions. Large spill - isolate 100m all directions, evacuate 300m downwind. If tank/rail car involved in fire, isolate 800m all directions. — Key Hazards — • TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury • Contact with molten substance may cause severe burns to skin and eyes. • Avoid any skin contact. — First Actions — • CALL 911. Then call the emergency response telephone number on the shipping paper, if available. • Keep unauthorized personnel away. • Stay upwind, uphill and/or upstream. • Ventilate closed spaces before entering, but only if properly trained and equipped. SOURCE: allfirefighter.com/hazmat/un/poisonous-by-inhalation-liquid-un-3390 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN3390 Poisonous by inhalation liquid, corrosive, n.o.s. (Inhalation Hazard Zone B) Cls6 ERG154 | allfirefighter.com/hazmat/un/poisonous-by-inhalation-liquid-un-3390SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/poisonous-by-inhalation-liquid-un-3390

Related UN Numbers in Class 6

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 3390

UN 3390 is Poisonous by inhalation liquid, corrosive, n.o.s. (Inhalation Hazard Zone B). It is assigned to ERG Guide 154 for initial emergency response.

The main hazard is poisonous vapor exposure by inhalation (Zone B). Skin contact and ingestion may also be dangerous depending on the exact chemical.

Use Level A vapor-protective chemical suit with positive-pressure SCBA for unknown or active releases. Downgrade only after monitoring and product identification.

Yes. It can cause severe chemical burns and may release corrosive or toxic vapors during a spill or fire.

Because n.o.s. PIH entries cover multiple chemicals. The exact name, concentration and SDS determine final PPE, isolation and control tactics.

Avoid direct contact, vapor inhalation, unprotected entry, low areas where vapors collect, and any incompatible extinguishing agent or runoff path.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.