UN 1689 — Sodium cyanide, solid
Placard: Toxic. ERG Guide 157. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.
UN 1689 is Sodium cyanide, solid, a highly toxic cyanide material assigned to ERG Guide 157. Acids, moisture or heat can release hydrogen cyanide, so air monitoring and runoff control are critical.
Hazard overview: UN 1689 presents cyanide poisoning, hydrogen cyanide gas and contaminated-runoff hazards. Avoid acid contact, control runoff, monitor for HCN where possible and do not rely on odor as a warning.
Response guidance: For a UN 1689 incident, responders should verify the product with shipping papers, package markings, SDS and ERG Guide 157. Establish incident command, isolate the area, stay upwind, prevent dust or vapor exposure, control runoff and choose entry or cleanup actions based on monitoring, SDS and local SOP.
Firefighter training notes: Training for UN 1689 should emphasize hydrogen cyanide generation, acid/moisture incompatibility, air monitoring, SCBA use, decontamination and medical coordination. Use ERG 157, SDS and local SOP.
Regulatory context: Sodium cyanide, solid is regulated as a toxic cyanide hazardous material and may trigger strict exposure, spill reporting, waste and emergency planning controls. Verify current requirements through shipping papers, SDS, facility documents and applicable DOT, OSHA, EPA, NFPA, state or local authority guidance.
Storage & handling: Sodium cyanide, solid should be stored in tightly closed compatible containers in a secure, dry, well-ventilated toxic-material area away from acids, moisture contamination, oxidizers, heat and unauthorized access. Storage should include cyanide emergency planning and contaminated-runoff control appropriate to the SDS.
UN 1689 Quick Details
Common Hazards of UN 1689
- HIGHLY TOXIC cyanide material; inhalation, ingestion or skin contact may be fatal.
- Acids, moisture or heat may release hydrogen cyanide gas.
- Hydrogen cyanide can be flammable and rapidly dangerous in low or poorly ventilated areas.
- Fire may produce hydrogen cyanide, nitrogen oxides and other toxic gases.
- Runoff, absorbents and contaminated equipment may carry cyanide hazards.
- Containers may rupture or fail when heated.
- Odor is not a reliable warning for hydrogen cyanide exposure.
Chemical Identity & Physical Properties
White granular or crystalline solid, sometimes with a faint almond-like odor. May appear as lumps or briquettes. Odorless when pure but often has characteristic bitter almond smell due to absorbed moisture.
| Also known as | Cyanide of sodiumCyanogranHydrocyanic acid sodium saltSodium cyanide solution |
| CAS Number | 143-33-9 |
| Appearance | White granular or crystalline solid, sometimes with a faint almond-like odor. May appear as lumps or briquettes. Odorless when pure but often has characteristic bitter almond smell due to absorbed moisture. |
| Flash Point | Not applicable (non-flammable solid) |
| Boiling Point | Not applicable (decomposes at 1496C/2725F) |
| Vapor Density | Not applicable (solid) |
| Water Reactivity | Reacts slowly with water and moisture to release highly toxic hydrogen cyanide gas (HCN). Reaction generates heat and accelerates in acidic conditions. Keep dry. |
Fireground Response Guidance — UN 1689
Extinguishing Media
PPE Requirements
Use positive-pressure SCBA and chemical protective clothing selected by hazmat specialists for cyanide dust, solution, vapor or fire exposure. Level A may be needed for close entry or unknown hydrogen cyanide concentrations; decontamination should address cyanide and metal contamination.
Isolation & Evacuation
First Actions for a UN 1689 Incident
- CALL 911. Then call the emergency response telephone number on the shipping paper, if available.
- Keep unauthorized personnel away.
- Stay upwind, uphill and/or upstream.
- Avoid breathing vapors, fumes, dust or mist and avoid all skin or eye contact.
- Avoid acids, water contamination or incompatible cleanup materials contacting cyanide product unless incident command confirms a safe control method.
- Do not touch or walk through spilled material unless properly trained and wearing appropriate protective equipment.
- Avoid creating dust clouds or spreading contaminated liquid, powder, solution, runoff or debris.
- Monitor for hydrogen cyanide where available; odor is not a reliable warning.
- Ventilate closed spaces before entering, but only if properly trained, equipped, monitored and authorized by incident command.
- Isolate the spill or leak area and expand the perimeter if dust, vapor, fire involvement or unknown concentration is present.
- Use ERG Guide 157, shipping papers, SDS, air monitoring and incident command for protective actions.
📋 Copy & Share Field Card
UN 1689 — Sodium cyanide, solidUse for: Quick radio or face-to-face size-up. Short, structured, field-ready.
Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.
Use for: Quick text to command or incoming units. Fits in a single SMS.