☣️ UN 2327 • CLASS 8

UN 2327 — Trimethylhexamethylenediamines

Placard: Corrosive. ERG Guide 153. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

UN 2327 is Trimethylhexamethylenediamines, a corrosive amine liquid assigned to ERG Guide 153. It can cause chemical burns and produce alkaline contaminated runoff.

Hazard overview: TOXIC and CORROSIVE amine liquid; inhalation, ingestion or skin contact may cause severe injury. Liquid and vapor can burn eyes, skin and respiratory tissue. Combustible material: may burn but does not ignite readily.

Response guidance: For a UN 2327 incident, verify the product with shipping papers, container markings, SDS and ERG Guide 153. Establish incident command, isolate the area, stay upwind, control ignition or incompatibility hazards, prevent runoff, dust or vapor spread and base entry/fire-control actions on monitoring and local SOP.

Firefighter training notes: Training for UN 2327 should emphasize toxic/corrosive exposure routes, contaminated clothing, toxic fire products, decontamination waste and runoff containment. Use ERG 153, SDS and local SOP.

Regulatory context: Trimethylhexamethylenediamines is regulated as a hazardous material for transportation and emergency response purposes. Storage, workplace exposure, emergency planning, spill reporting, waste handling and environmental requirements vary by exact product, concentration, quantity and jurisdiction. Verify current requirements through shipping papers, SDS, container markings and applicable DOT, OSHA, EPA, NFPA, state or local authority guidance.

Storage & handling: Trimethylhexamethylenediamines should be stored in tightly closed compatible containers in a secure toxic/corrosive-material area with secondary containment, restricted access, ventilation and waste/decontamination planning according to SDS.

Advertisement

UN 2327 Quick Details

UN 2327
Product name: Trimethylhexamethylenediamines
DOT Class: 8
Placard type: Corrosive
ERG Guide: 153 (check current ERG)
Initial isolation: ERG 153: isolate spill 50m all directions; if tank/rail car involved in fire, isolate 800m all directions

Common Hazards of UN 2327

  • TOXIC and CORROSIVE amine liquid; inhalation, ingestion or skin contact may cause severe injury.
  • Liquid and vapor can burn eyes, skin and respiratory tissue.
  • Combustible material: may burn but does not ignite readily.
  • Mixing with water may generate heat and spread alkaline/corrosive contamination.
  • Fire may produce nitrogen oxides and irritating/toxic smoke.
  • Runoff may be alkaline, toxic, corrosive and environmentally harmful.
  • Containers may rupture or fail when heated.

Chemical Identity & Physical Properties

Clear to pale yellow liquid with an amine-like, fishy odor. Corrosive organic base at room temperature.

Also known asTMHMDATrimethylhexamethylene diamineTrimethyl-1,6-hexanediamineTMD
AppearanceClear to pale yellow liquid with an amine-like, fishy odor. Corrosive organic base at room temperature.
Flash Point93C (199F)
Boiling Point215-255C (419-491F) depending on isomer
Vapor Density5.9 (heavier than air)
Water ReactivityNo significant reaction, but hydrolyzes slowly forming alkaline solution
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 2327

Extinguishing Media

Use alcohol-resistant foam, dry chemical or CO2 as compatible with the product and fire size. Water spray may cool containers from a protected position; contain alkaline/toxic runoff.

PPE Requirements

⚠️ Level B minimum; SCBA required; full chemical-resistant suit for splash/spill; corrosive to skin and eyes

Use positive-pressure SCBA for vapor, dust, mist, fire or confined-space exposure. Wear chemical-resistant gloves, boots, eye/face protection and protective clothing selected from SDS; avoid all skin contact.

Isolation & Evacuation

ERG 153: isolate spill 50m all directions; if tank/rail car involved in fire, isolate 800m all directions
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 153).

First Actions for a UN 2327 Incident

  • CALL 911. Then call the emergency response telephone number on the shipping paper, if available.
  • Keep unauthorized personnel away.
  • Stay upwind, uphill and/or upstream.
  • Avoid breathing vapors, dust, mist, smoke or fumes and avoid skin or eye contact.
  • Do not touch damaged containers or spilled material unless properly trained and wearing appropriate protective equipment.
  • Ventilate closed spaces before entering, but only if properly trained, equipped, monitored and authorized by incident command.
  • Isolate the spill or release area and expand the perimeter for fire involvement, vapor spread, dust generation, water reaction or unknown product identity.
  • Use ERG Guide 153, shipping papers, SDS, air monitoring and incident command for protective actions.
Advertisement

📋 Copy & Share Field Card

UN 2327 — Trimethylhexamethylenediamines
HAZMAT RADIO NOTE — UN 2327 Product: Trimethylhexamethylenediamines Class 8 / Corrosive / ERG 153 PPE: Level B minimum; SCBA required; full chemical-resistant suit for splash/spill; corrosive to skin and eyes ISOLATION: ERG 153: isolate spill 50m all directions; if tank/rail car involved in fire, isolate 800m all directions ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 2327 — Trimethylhexamethylenediamines Class: 8 | Placard: Corrosive | ERG Guide: 153 Appearance: Clear to pale yellow liquid with an amine-like, fishy odor. Corrosive organic base at room temperature. Water Reactivity: No significant reaction, but hydrolyzes slowly forming alkaline solution Extinguishing: Use alcohol-resistant foam, dry chemical or CO2 as compatible with the product and fire size. Water spray may cool containers from a protected position; contain alkaline/toxic runoff. PPE: Level B minimum; SCBA required; full chemical-resistant suit for splash/spill; corrosive to skin and eyes Isolation: ERG 153: isolate spill 50m all directions; if tank/rail car involved in fire, isolate 800m all directions — Key Hazards — • TOXIC and CORROSIVE amine liquid; inhalation, ingestion or skin contact may cause severe injury. • Liquid and vapor can burn eyes, skin and respiratory tissue. • Combustible material: may burn but does not ignite readily. — First Actions — • CALL 911. Then call the emergency response telephone number on the shipping paper, if available. • Keep unauthorized personnel away. • Stay upwind, uphill and/or upstream. • Avoid breathing vapors, dust, mist, smoke or fumes and avoid skin or eye contact. SOURCE: allfirefighter.com/hazmat/un/trimethylhexamethylenediamines-un-2327 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN2327 Trimethylhexamethylenediamines Cls8 ERG153 | allfirefighter.com/hazmat/un/trimethylhexamethylenediamines-un-2327SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/trimethylhexamethylenediamines-un-2327

Related UN Numbers in Class 8

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 2327

UN 2327 is Trimethylhexamethylenediamines, a hazardous material assigned to ERG Guide 153.

It is combustible but does not ignite readily; corrosive exposure is the main hazard.

ERG Guide 153 applies to UN 2327 for initial isolation, protective actions and first response guidance.

TOXIC and CORROSIVE amine liquid; inhalation, ingestion or skin contact may cause severe injury. Liquid and vapor can burn eyes, skin and respiratory tissue. Combustible material: may burn but does not ignite readily.

Use positive-pressure SCBA for vapor, dust, mist, fire or confined-space exposure. Wear chemical-resistant gloves, boots, eye/face protection and protective clothing selected from SDS; avoid all skin contact.

Toxic or corrosive material can absorb through skin or contaminate clothing, so chemical-resistant PPE and decontamination are important.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.