☣️ UN 1547 • CLASS 6
Aniline
Placard: Toxic. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.
🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.
Advertisement
Quick details
UN 1547
Class: 6
Placard type: Toxic
ERG: Guide 153 (check current ERG)
Verify shipping papers and exact product details; use ERG Guide 153 for initial actions and isolation/evacuation guidance.
Common hazards (high level)
- TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury
- Methyl bromoacetate (UN2643) is an eye irritant/lachrymator (causes flow of tears).
- Contact with molten substance may cause severe burns to skin and eyes.
- Avoid any skin contact.
- Fire may produce irritating, corrosive and/or toxic gases.
- Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental
- Combustible material: may burn but does not ignite readily.
- When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion
First actions (field-minded)
- CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
- Keep unauthorized personnel away.
- Stay upwind, uphill and/or upstream.
- Ventilate closed spaces before entering, but only if properly trained and equipped.
- Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters
- For highlighted materials: see Table 1 - Initial Isolation and Protective Action Distances.
- For non-highlighted materials: increase the immediate precautionary measure distance, in the downwind
Copy / share note
MAYDAY / HAZMAT QUICK NOTE UN 1547 — Aniline Class: 6 | Placard: Toxic ERG: Guide 153 (check current ERG) FIRST ACTIONS: use SOP/SOG + ERG; stage upwind; isolate; deny entry; request Hazmat.
Advertisement
FAQ
A UN/NA number is a four-digit identifier used in transport markings and placards to help identify hazardous materials for emergency response.
No. This page is a training/quick-reference aid. Always consult the current ERG and follow your SOP/SOG for incident-specific protective actions.
Common locations include placards, orange panels, shipping papers, SDS documents, container markings, rail car/vehicle IDs, and facility signage.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.