☣️ UN 3447 • CLASS 6
Nitroxylenes, solid
Placard: Toxic. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.
🚒☣️
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.
Advertisement
Quick details
UN 3447
Class: 6
Placard type: Toxic
ERG: Guide 152 (check current ERG)
Isolation: ERG 152: isolate spill area at least 25m in all directions; if tank/railcar involved in fire, isolate 800m in all directions and evacuate initially
Chemical & Response Details
| Also known as | Nitrated xylenesNitro-dimethylbenzenesMononitro xylenesDinitrotoluene isomers (related) |
| Appearance | Yellowish to tan crystalline solid or powder at room temperature. May have a faint aromatic odor. Typically shipped as a solid mass or molten liquid. |
| Flash Point | Not applicable (combustible solid, melts above 25C) |
| Boiling Point | Approximately 240-246C (464-475F) depending on isomer |
| Vapor Density | Not applicable (solid at room temperature) |
| Water Reactivity | No significant reaction with water; insoluble in water |
| Extinguishing | Dry chemical, CO2, water spray for cooling containers; foam may be used on molten material |
| PPE | ⚠️ Level B minimum; SCBA required; full chemical-resistant suit to prevent any skin contact; highly toxic by all routes of exposure |
| Isolation | ERG 152: isolate spill area at least 25m in all directions; if tank/railcar involved in fire, isolate 800m in all directions and evacuate initially |
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.
Common hazards (high level)
- Highly toxic, may be fatal if inhaled, ingested or absorbed through skin.
- Contact with molten substance may cause severe burns to skin and eyes.
- Avoid any skin contact.
- Fire may produce irritating, corrosive and/or toxic gases.
- Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental
- Combustible material: may burn but does not ignite readily.
- Containers may explode when heated.
- Those substances designated with a (P) may polymerize explosively when heated or involved in a fire.
First actions (field-minded)
- CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
- Keep unauthorized personnel away.
- Stay upwind, uphill and/or upstream.
- Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters
- For highlighted materials: see Table 1 - Initial Isolation and Protective Action Distances.
- For non-highlighted materials: increase the immediate precautionary measure distance, in the downwind
Advertisement
📋 Copy & Share
UN 3447 — Nitroxylenes, solid HAZMAT RADIO NOTE — UN 3447
Product: Nitroxylenes, solid
Class 6 / Toxic / ERG 152
PPE: Level B minimum; SCBA required; full chemical-resistant suit to prevent any skin contact; highly toxic by all routes of exposure
ISOLATION: ERG 152: isolate spill area at least 25m in all directions; if tank/railcar involved in fire, isolate 800m in all directions and evacuate initially
ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO
Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.
=== IC HAZMAT BRIEFING ===
UN 3447 — Nitroxylenes, solid
Class: 6 | Placard: Toxic | ERG Guide: 152
Appearance: Yellowish to tan crystalline solid or powder at room temperature. May have a faint aromatic odor. Typically shipped as a solid mass or molten liquid.
Water Reactivity: No significant reaction with water; insoluble in water
Extinguishing: Dry chemical, CO2, water spray for cooling containers; foam may be used on molten material
PPE: Level B minimum; SCBA required; full chemical-resistant suit to prevent any skin contact; highly toxic by all routes of exposure
Isolation: ERG 152: isolate spill area at least 25m in all directions; if tank/railcar involved in fire, isolate 800m in all directions and evacuate initially
— Key Hazards —
• Highly toxic, may be fatal if inhaled, ingested or absorbed through skin.
• Contact with molten substance may cause severe burns to skin and eyes.
• Avoid any skin contact.
— First Actions —
• CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper
• Keep unauthorized personnel away.
• Stay upwind, uphill and/or upstream.
• Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters
SOURCE: allfirefighter.com/hazmat/un/3447 | Always use current ERG + SOP/SOGIC BRIEFING
Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief. Full chemical + response details.
UN3447 Nitroxylenes, solid Cls6 ERG152 | ERG 152: isolate spill area at least 25m in all directions; if tank/railcar invo | allfirefighter.com/hazmat/un/3447SMS / 160 CHAR
Use for: Quick text to command or incoming units. Fits in a single SMS. Includes link to full page.
⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/3447
Advertisement
FAQ
Highly toxic, may be fatal if inhaled, ingested or absorbed through skin. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental Combustible material: may burn but does not ignite readily. Containers may explode when heated. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire.
CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper Keep unauthorized personnel away. Stay upwind, uphill and/or upstream.
Level B minimum; SCBA required; full chemical-resistant suit to prevent any skin contact; highly toxic by all routes of exposure
No. This is a training/quick-reference aid only. Always consult the current ERG Guide 152 and your department SOP/SOG for incident-specific protective actions.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.