☣️ UN 3190 • CLASS 4

UN 3190 — Self-heating solid, inorganic, n.o.s.

Placard: Spontaneously Combustible. ERG Guide 135. Training/quick-reference only — use current ERG + SOP/SOG for incident-specific actions.

🚒☣️
⚠️ Verification required: Broad or variable material category; verify exact product, SDS and shipping papers.
⚠️ This page is a quick-reference aid. For real incidents: stage upwind, isolate, deny entry, request Hazmat early, and consult the current ERG + SOP/SOG.

Self-heating solid, inorganic, n.o.s. is a broad self-heating solid entry. Product identity, packaging and temperature history control the response.

Hazard overview: The main risk is spontaneous heat buildup leading to ignition, toxic smoke, re-ignition or container failure.

Response guidance: Isolate, keep away from combustibles and moisture, monitor for heating, and use dry media unless SDS approves another method.

Firefighter training notes: Use this page as initial reference only; responders should train from ERG, SDS, department SOPs and product-specific preplans.

Regulatory context: UN 3190 is regulated for transport under its proper shipping name, hazard class 4 and ERG Guide 135. Verify current DOT/PHMSA requirements and shipping papers.

Storage & handling: Store only as permitted by the SDS and applicable code: segregate from incompatible materials, protect packages from heat, damage and moisture, and maintain labels.

Advertisement

UN 3190 Quick Details

UN 3190
Product name: Self-heating solid, inorganic, n.o.s.
DOT Class: 4
Placard type: Spontaneously Combustible
ERG Guide: 135 (check current ERG)
Initial isolation: ERG 135: Initial isolation 50m all directions; protective action distance 100m downwind for small spills, 300m for large spills

Common Hazards of UN 3190

  • Self-heating solid; may generate heat and ignite when exposed to air, moisture or contamination.
  • Fire can develop without an outside ignition source if heat is not dissipated.
  • Burning material may produce dense irritating, toxic or corrosive smoke.
  • Water compatibility varies; water may worsen reaction or spread hot material.
  • Containers may rupture when heated.
  • Re-ignition is possible after apparent extinguishment.
  • Because this is an n.o.s. entry, exact SDS data controls final tactics.

Chemical Identity & Physical Properties

Variable appearance depending on specific substance; typically a dry powder or granular solid. May be gray, black, or metallic in color. Generally odorless or may have a slight metallic odor.

Also known asSelf-heating solid inorganic NOSSpontaneously heating solid inorganicPyrophoric inorganic solid
AppearanceVariable appearance depending on specific substance; typically a dry powder or granular solid. May be gray, black, or metallic in color. Generally odorless or may have a slight metallic odor.
Flash PointNot applicable (self-heating/pyrophoric material)
Boiling PointNot applicable (varies by specific inorganic compound)
Vapor DensityNot applicable (solid)
Water ReactivityVariable; avoid water or moisture until exact material compatibility is confirmed
Chemical details are general reference only. Always verify with current SDS, ERG, and SOP/SOG.

Fireground Response Guidance — UN 3190

Extinguishing Media

Dry chemical, dry sand, soda ash or other SDS-approved dry media; avoid water unless confirmed compatible

PPE Requirements

⚠️ Level B minimum with SCBA; heat-resistant clothing recommended; avoid moisture on gloves/equipment

Use SCBA and chemical protective clothing; upgrade protection for toxic, corrosive or unknown vapor conditions.

Isolation & Evacuation

ERG 135: Initial isolation 50m all directions; protective action distance 100m downwind for small spills, 300m for large spills
Always confirm protective actions with the current edition of the Emergency Response Guidebook (ERG Guide 135).

First Actions for a UN 3190 Incident

  • Call 911 and the emergency response number shown on shipping papers.
  • Keep unauthorized personnel away and establish an isolation perimeter.
  • Stay upwind, uphill and upstream; avoid low areas where vapors or gases may collect.
  • Avoid breathing vapors, dust, smoke or decomposition products.
  • Do not touch damaged containers or spilled material without appropriate PPE.
  • Separate from combustibles, moisture and ignition sources while monitoring for heat buildup.
  • Ventilate confined spaces only if trained, equipped and atmospheric monitoring supports entry.
  • Use ERG guidance, SDS, labels and shipping papers to confirm the exact hazards before action.
Advertisement

📋 Copy & Share Field Card

UN 3190 — Self-heating solid, inorganic, n.o.s.
HAZMAT RADIO NOTE — UN 3190 Product: Self-heating solid, inorganic, n.o.s. Class 4 / Spontaneously Combustible / ERG 135 PPE: Level B minimum with SCBA; heat-resistant clothing recommended; avoid moisture on gloves/equipment ISOLATION: ERG 135: Initial isolation 50m all directions; protective action distance 100m downwind for small spills, 300m for large spills ACTION: Stage upwind · Isolate · Deny entry · Request HazmatRADIO

Use for: Quick radio or face-to-face size-up. Short, structured, field-ready.

SMS WhatsApp
=== IC HAZMAT BRIEFING === UN 3190 — Self-heating solid, inorganic, n.o.s. Class: 4 | Placard: Spontaneously Combustible | ERG Guide: 135 Appearance: Variable appearance depending on specific substance; typically a dry powder or granular solid. May be gray, black, or metallic in color. Generally odorless or may have a slight metallic odor. Water Reactivity: Variable; avoid water or moisture until exact material compatibility is confirmed Extinguishing: Dry chemical, dry sand, soda ash or other SDS-approved dry media; avoid water unless confirmed compatible PPE: Level B minimum with SCBA; heat-resistant clothing recommended; avoid moisture on gloves/equipment Isolation: ERG 135: Initial isolation 50m all directions; protective action distance 100m downwind for small spills, 300m for large spills — Key Hazards — • Self-heating solid; may generate heat and ignite when exposed to air, moisture or contamination. • Fire can develop without an outside ignition source if heat is not dissipated. • Burning material may produce dense irritating, toxic or corrosive smoke. — First Actions — • Call 911 and the emergency response number shown on shipping papers. • Keep unauthorized personnel away and establish an isolation perimeter. • Stay upwind, uphill and upstream; avoid low areas where vapors or gases may collect. • Avoid breathing vapors, dust, smoke or decomposition products. SOURCE: allfirefighter.com/hazmat/un/self-heating-solid-inorganic-un-3190 | Always use current ERG + SOP/SOGIC BRIEFING

Use for: Incident command briefing, staging area whiteboard, or pre-entry team brief.

SMS (short)
UN3190 Self-heating solid, inorganic, n.o.s. Cls4 ERG135 | allfirefighter.com/hazmat/un/self-heating-solid-inorganic-un-3190SMS / 160 CHAR

Use for: Quick text to command or incoming units. Fits in a single SMS.

⚠️ Quick-reference only. Always use current ERG + SOP/SOG for incident-specific actions. Page: https://allfirefighter.com/hazmat/un/self-heating-solid-inorganic-un-3190

Related UN Numbers in Class 4

Discovery block for training / quick reference. Always consult the current ERG + your SOP/SOG for operations.
Advertisement

Frequently Asked Questions about UN 3190

It is a broad organic, inorganic self-heating solid entry; the exact product must be confirmed.

Yes. Self-heating materials can reach ignition temperature without an external flame.

Do not use water unless the SDS confirms compatibility; dry agents are safer for unknown products.

Use SCBA with chemical protective clothing; Level A may be needed for toxic or corrosive vapors.

Heat can remain inside the material and flare again when exposed to air.
Sources (high level): DOT/PHMSA marking & class concepts + ERG usage principles. This page does not reproduce ERG guide text—always consult the current ERG for incident-specific protective actions.